The product is not suitable for supplying life-sustaining medical devices. Please ensure that no personal injury would lead due to the power outage of the battery system. The product must only be used in countries for which it is approved by Solplanet and the grid operator.
Page 4
Important safety instructions The product has been designed and tested strictly according to the international safety requirements. As with all electrical or electronical devices, there are residual risks despite careful construction. To prevent personal injury and property damage and to ensure long-term operation of the product, read this section carefully and observe all safety information at all times.
Page 5
WARNING Risk of injury due to weight of product! Injuries may result if the product is incorrectly handled or dropped while being transported or mounted. Transport and lift the product carefully. Take the weight of the product into account. Wear suitable personal protective equipment, in accordance with local regulations, ...
Page 6
Symbols on the label Beware of a danger zone! This symbol indicates that the product must be additionally grounded if additional grounding or equipotential bonding is required at the installation site. Beware of DC voltage and operating current! The battery operates at DC voltage and current. Work on the battery must only be carried out by skilled and authorized electricians.
AISWEI New Energy Technology (Yangzhong) Co., Ltd confirms herewith that the products described in this document are in compliance with the fundamental requirements and other relevant provisions of the above mentioned directives. The entire EU Declaration of Conformity can be found at www.solplanet.net. Overview Object...
Link port out On/Off button DI (Digital input) Link port in Scope of Delivery Standard package Battery Module Package Base Package QG0075_ASW5120-LB-G3_EN_540-300731-02_V03_0125...
Page 11
Object Description Quantity Battery module M5x16 screw Decorative cover Base Quick installation guide BMS communication cable Positive battery cable (2 m) Negative battery cable (2 m) Potential earth (PE) cable Terminating resistor L-bracket Module locking plate (left) Module locking plate (right) Expansion anchor bolt (M8 X 80) M5X10 screw Hexagon screw (M6 X 16)
Battery Connection 1-4 batteries connected with one set of output cables (120 A max.) QG0075_ASW5120-LB-G3_EN_540-300731-02_V03_0125...
Page 20
2-4 batteries connected with two sets of output cables in parallel (210 A max.) QG0075_ASW5120-LB-G3_EN_540-300731-02_V03_0125...
Page 21
Cut the cable hole according to the wiring mode. QG0075_ASW5120-LB-G3_EN_540-300731-02_V03_0125...
Page 22
The following information is needed to provide necessary assistance: ——Battery model ——Battery series number ——Fault code ——Installation location EMEA Service email: service.EMEA@solplanet.net APAC Service email: service.APAC@solplanet.net LATAM Service email: service.LATAM@solplanet.net Aiswei Greater China Service email: service.china@aiswei-tech.com Hotline: +86 400 801 9996 Taiwan Service email: service.taiwan@aiswei-tech.com...
Need help?
Do you have a question about the ASW5120-LB-G3 and is the answer not in the manual?
Questions and answers