Kingfisher 5059340779072 Manual

1 2 3 4
23/06/23 13/07/23 XX/XX/23 XX/XX/23
Korey Korey NAME NAME
EN Standard Compression Bath
Trap
EN IMPORTANT - These instructions are for your
safety. Please read through them thoroughly prior
to handling the product and retain them for future
reference.
5059340779072
V10723_5059340779072_MAND1_2223
5059340779072_MNL_IN_V02.indd 1 5059340779072_MNL_IN_V02.indd 1
5
EAN: 5059340779072
XX/XX/23
Impala Ref: PRJ28337
Page Size: A4
NAME
KNG: KNG-2643-0011
EN Parts
01. x1 02. x1
04. x1 05. x2
07. x2 08. x1
EN Product description
This kit includes all the part needed to install a new
or replacement bath trap from the customers male
1 1/2" male threaded bath waste and provides a
40-43 mm compression outlet connection for PP,
ABS or PVC pipes.
EN Safety
Before you start
• Don't rush, read the instructions first and familiarise
yourself with the sequence before you begin.
• Make sure you have all the parts listed and that
none are damaged. Check all the packaging as
components may be concealed; do not dispose
03. x1
of packaging until you have located all the parts.
If any parts are missing or damaged, return the
product to store for a refund or replacement.
• Failure to follow these instructions may result in
personal injury, damage to the product and your
property.
• For domestic use only.
06. x1
Safety
• We do not recommend the use of sealants,
as the seals supplied are designed to provide
watertight connections under standard operating
conditions. The compression outlet connection is
suitable for PVC, ABS and PP
40-43 mm UK waste pipes. If customers wish
to use sealants, be aware that this could cause
damage to the product over time.
• Do not over-tighten components as damage over
time may occur.
• Using strong clamping force from tools can also
damage the product and finish. Please take care
if such tools are used.
• Do not use any Chemicals (e.g. Disinfectant
Sprays/Bleaches etc) directly with this product for
extended periods of time as damage may occur.
• The product, its components and packaging are
not toys and should be kept out of the reach of
children.
When installing the product, care should be taken
to observe the instructions provided along with any
instruction provided by the manufacturers of the
adjoining products.
Note: All waste pipes should be installed in
compliance with the requirements of Gravity
drainage systems inside buildings. Sanitary
pipework, layout and calculation standard
BS EN 12056.
Guarantee
We take special care to select high quality materials
and use manufacturing techniques that allow us to
create products incorporating design and durability.
This product has a manufacturer's guarantee of
5 years against manufacturing defects, from the date
of purchase (if bought in store) or date of delivery (if
bought online), at no additional cost for normal (non-
professional or commercial) household use.
To make a claim under this guarantee, you must
present your proof of purchase (such as a sales
receipt, purchase invoice or other evidence admissible
under applicable law), please keep your proof of
purchase in a safe place. For this guarantee to
apply, the product you purchased must be new, it
will not apply to second hand or display products.
Unless stated otherwise by applicable law, any
replacement product issued under this guarantee will
only be guaranteed until expiry of the original period
guarantee period.
This guarantee covers product failures and
malfunctions provided the product was used for
the purpose for which it is intended and subject
to installation, cleaning, care and maintenance in
accordance with the information contained in these
terms and conditions, in the user manual and standard
practice, provided that standard practice does not
conflict with the user manual.
This guarantee does not cover defects and damage
caused by normal wear and tear or damage that could
be the result of improper use, faulty installation or
assembly, neglect, accident, misuse, or modification
of the product. Unless stated otherwise by applicable
law, this guarantee will not cover, in any case, ancillary
costs (shipping, movement, costs of uninstalling and
reinstalling, labour etc), or direct and indirect damage.
The guarantee does not cover replacement seals.
If the product is defective, we will, within a reasonable
time, replace or refund.
Rights under this guarantee are enforceable in
the country in which you purchased this product.
Guarantee related queries should be addressed to the
store you purchased this product from.
The guarantee is in addition to and does not affect
your statutory rights.
IMPORTANT - RETAIN
THIS INFORMATION
FOR FUTURE
REFERENCE:
READ CAREFULLY
13/7/2023 11:55 AM 13/7/2023 11:55 AM