Pitchbend / Modwheel / Aftertouch; Improvements To Sample Programs; Per-Sample Panning; Multi Pad Edit - Akai MPC5000 Manual Addendum

Pitchbend / Modwheel / Aftertouch

The Pitchbend Range, Modwheel Depth and Aftertouch amount can be
set in the PGM page.
Program Mode.
Pitchbend
Pitchbend responds to MIDI Pitchbend, and can be set to have a range
of 0-12 semitones
Modwheel>LFO
The Modwheel controls the LFO Depth, and can be set from 0-100%
effect.
Aftertouch>Filter
Aftertouch can be set to control filter cutoff, and can be set from 0-100% effect.

Improvements to Sample Programs

The following section details improvements to Sample Programs, most often used for Drums, Loops and Slices.

Per-Sample Panning

Samples slots can be individually panned. To adjust the panning of a
sample, do the following:
01. Select the sample slot you wish to pan.
02. Press the [WINDOW] button.
The PLAY MODE window will be displayed.
represented by the corresponding number.
03. Adjust the 'Pan' Field to change the stereo position of the sample
within the selected sample slot.

Multi Pad Edit

The MPC5000 now has the ability to edit multiple pads at the same
time, setting all pads to the same setting.
active, any change made to a pad will be made to all pads. To activate
Multi Pad Edit, do the following:
01. In PROGRAM Mode, Select the 'Pad Number' field as indicated on
the right.
02. Scroll with the [DATA] wheel to the left, or press the [-] button.
The 'Pad Number' field will change to 'MULTI' as indicated on the Right.
To access the PGM page, press [F3] (PGM) in
Each sample slot is
When Multi Pad Edit is
19