Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CTC Union FRM220-100GE-2Q
Summary of Contents for CTC Union FRM220-100GE-2Q
- Page 1 User Guide FRM220-100GE-2Q 100GE QSFP28 to QSFP28 Transponder sales@ctcu.com...
- Page 2 8F, No. 60 Zhouzi St., Neihu, Taipei 114, Taiwan T +886-2-26591021 F +886-2-26590237 E sales@ctcu.com H www.ctcu.com 2024 CTC Union Technologies Co., LTD. All trademarks are the property of their respective owners. Technical information in this document is subject to change without notice.
-
Page 3: Table Of Contents
Table of Contents Introduction .................. 4 Features ..................4 Specifications ................5 Management Features ..............5 Panel ..................... 6 Chassis Installation ..............7 QSFP28 Units ................7 QSFP28 Installation ..............8 LED Indicators ................9 Console Management ..............10 ....................10 ONSOLE ETTINGS ...................... -
Page 4: Introduction
100GBASE-ER4 and 100GBASE-SR4. The FRM220-100GE-2Q is hot- swappable with two QSFP28 sockets for 100GE QSFP28 transceivers. The installation and setup are simple plug and play. The FRM220-100GE-2Q can be inserted into any powered FRM220-CH20, CH08, CH04 chassis or CH02M, CH02/SMT standalone chassis with QSFP28 transceivers required for the application. -
Page 5: Specifications
Humidity 5~90% (Non-condensing) Management Features When FRM220-100GE-2Q is placed in a stand-alone chassis with serial management port, this device also supports a text-based serial terminal with an easy-to-use menu system for configuration. When placed in a managed chassis, the card is configured and monitored through the chassis NMC (network management controller) via console, Telnet, Web HTTP or SNMP. -
Page 6: Panel
Panel Reference Table Description QSFP28 transceiver slot (Line Side) QSFP28 transceiver slot (Client Side) LED indicators Line Link (1~4) LED indicators Client Link (1~4) LED indicators Thumb screw Figure 1. Front Panel... -
Page 7: Chassis Installation
Figure 3. FRM220-CH20 (AC, DC, 2AC, 2DC, or AD) QSFP28 Units The FRM220-100GE-2Q accepts QSFP28 units that comply with MSA (Multi-Source Agreement) standard. When selecting QSFP28 optical modules, make sure the modules are able to support the required data rates. Follow all ESD precautions when handling the card and pluggable modules. -
Page 8: Qsfp28 Installation
QSFP28 Installation QSFP28 modules supplied by CTC Union are with a pull-tab ejector as shown below. The pluggable module also has locking pins that secures the module into the QSFP28 cage. Inserting a QSFP28 Module into the cage Step 1. Line up the QSFP28 module with the port, and slide it into the cage. -
Page 9: Led Indicators
LED Indicators Color State Status Power on Device is disabled (Flash once Green Flash per second) No Power System is ready Device is disabled or system is Green not ready Flash Firmware upgrade Green 100G mode is enabled 100G alarms (Link down, local Amber fault conditions, not locked) 100G... -
Page 10: Console Management
Connect the serial cable to the CH02M's DB9. Run the terminal emulation program. With powered on, press [ESC] or [Enter] to display the "Main Menu" screen. The following is an example. **************************************** CTC UNION TECHNOLOGIES CO.,LTD FRM220-100GE-2Q **************************************** Ver:[1.100-1.000-0.000-0.000] [ CH-02M S2 ]... -
Page 11: Operation
The upper side of the console screen displays transceiver status and the current state of each QSFP28 including TX Fault status, Link Status & CDR Lock. The bottom side of the console screen provides options to set up the device such as working mode & loopback test. See below for detailed explanations of the provided options: Operation Select any of the menu items by keying in the menu item number or... -
Page 12: Working Mode
Working Mode <1> Data Rate: Use this menu to select the working mode which can be 100GBase-R or 40GBase-R. <2> FEC Function: FEC (Forward Error Correction) function is an error correction method that is used to detect and correct a limited number of errors in transmitted data without the need for retransmission. -
Page 13: Fiber Configuration
Loss propagation or LFP is a method of forwarding a link loss from one side to the other over the transponder. Loss Propagation of FRM220-100GE-2Q supports "Line Side", "Client Side" and "Line and Client Side" fiber link fault application for troubleshooting purposes. - Page 14 QSFP28, such as optical output power, optical input power, temperature, etc. QSFP28 D/D Function Status: << Optical LINE D/D Function Status >> Vendor Name :[ CTC UNION Vendor Part Number :[ QSFP28-000-SR4 Vendor Serial Number :[ FC2003020106 Transceiver :[ 100GBASE-SR4...
-
Page 15: Test Function
When placed in a managed FRM220- CH20 chassis, the loopback can be controlled by the NMC manager in FRM220 chassis. FRM220-100GE-2Q can enable loopback (LB) for Line or Client at the local side. See below for descriptive diagrams. QSFP28... -
Page 16: Upgrade Firmware
Upgrade Firmware Stand-alone Firmware Upgrading via Xmodem The FRM220-100GE-2Q card may be firmware upgraded using XMODEM when placed in the chassis such as CH02M. The user may use serial terminal such as a notebook computer that has an RS232 port or via a commonly available USB to RS232 adapter. -
Page 17: Firmware Upgrading Via Nmc Card
[ CH- 02M S2] Firmware Upgrading via NMC Card The FRM220-100GE-2Q card may be firmware upgraded when it is placed in the FRM220 with NMC management card. The user may use a local console connection to the NMC, a remote Telnet (IP) connection, or a Web based (HTTP) connection with any available browser. - Page 18 Select the line card type (FRM220-100GE-2Q) and local unit. Enter filename. The upgrade should complete in only a couple of minutes. DO NOT disconnect or pullout/insert any other cards during the upgrade process.
- Page 19 Manual Release Date Revision Version 1.001 2021/3/8 - Preliminary version 1.001 2024/11/18 - Remove 25G multiplexer mode...
Need help?
Do you have a question about the FRM220-100GE-2Q and is the answer not in the manual?
Questions and answers