Download Print this page

Adesso Trinity 4239 Assembly Instruction

5-arm arc lamp

Advertisement

Available languages

Available languages

Quick Links

NOTE : THIS LAMP SHIPS IN 2
SEPARATE BOXS
Assembly Instructions (English)
ASSEMBLY INSTRUCTION FOR
5-Arm Arc Lamp
1. Fold the excess cord and insert into tube (A), then
place part (G) into tube (A) and tighten it with
screw(H).
2. Screw tube (A) onto Tube (B).
3. Insert tube (B) onto base (C) & washer (D), then
tighten it with nut(E) by using wrench (F). You may
need to pull any excess cord gently through the poles
so that these two parts fit.
Note: The Arc lamp should face forward in the
same direction as the switch, with the cord coming
out of the back of the base.
4. Place shade(I) onto socket and tighten it with
socket ring(J).
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to
reduce the risk of electric shock (one blade is larger than the
other). This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician.Do not use
with an extension cord unless the plug can be fully inserted.
DO NOT ALTER THE PLUG .
----------------------------------------------------
BULB TYPE :
Use only with maximum of 5*60 watt
incandescent bulbs or 5*13W CFL bulbs. (bulbs not included)
Must use all incandescent or all CFL bulbs.
PARTS DIAGRAM
(1) * washer (D)
(1) * wrench (F)
(5) * shade(I)
(1)*Nut(E)
(1) *screw(H)
(5) *socket ring(J)
1.0

Advertisement

loading
Need help?

Need help?

Do you have a question about the Trinity 4239 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Adesso Trinity 4239

  • Page 1 ASSEMBLY INSTRUCTION FOR 5-Arm Arc Lamp 1. Fold the excess cord and insert into tube (A), then place part (G) into tube (A) and tighten it with screw(H). 2. Screw tube (A) onto Tube (B). 3. Insert tube (B) onto base (C) & washer (D), then tighten it with nut(E) by using wrench (F).
  • Page 2 INSTRUCCIONES DE ENSAMBLAJE PARA 4239-22/ 26 Lámpara de arco de 5 Luces 1. Doble el exceso de cable e insértelo en el poste (A), luego coloque la pieza (G) en el poste(A) y apriétela con el tornillo (H). 2. Enrosque el poste (A) en el poste (B). 3.