Adesso 4271-21 Assembly Instruction

Assembly Instructions (English)
ASSEMBLY INSTRUCTION FOR
LED Floor Lamp
1. Screw tube (B) clockwise onto base (A) and
turn to tighten.
2. Screw tube (B), (C) and tube (D) together. You
may need to pull any excess cord gently
3. Screw the upper lamp body (F) onto tube(E)
clockwise until tight.
4. Fold the excess cord and insert into tube (D),
then screw tube (E) and (D) together.
5. Screw tube (G) onto lamp body (F) until tight.
7. Insert the G9 LED bulbs (H) onto each socket.
8. Place the opal glass shades (I) onto each socket,
then turn it clockwise until tight.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to
reduce the risk of electric shock (one blade is larger
than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician.Do not use with an extension cord
unless the plug can be fully inserted.
ALTER THE PLUG .
-------------------------------------------------------
BULB TYPE: 6pcs * G9 3W LED bulb (bulb
included).
PARTS DIAGRAM
(2) * tube (G)
(6) * G9 3W LED bulb (H)
(6) * Opal glass shade (I)
1.0
DO NOT