Dell 5160 Owner's Manual page 86

3 Place your finger under the cover at the indentation and lift the cover open.
4 If a modem is not already installed, go to step 5. If you are replacing a modem, remove the
existing modem:
Remove the screws securing the modem to the system board, and set them aside.
a
Pull straight up on the attached pull-tab to lift the modem out of its connector on the
b
system board, and disconnect the modem cable.
modem cable
5 Connect the modem cable to the modem.
86
Adding and Replacing Parts
screws (2)
pull-tab
captive screw
modem/Mini PCI
card cover
modem cable connector