Cooper Lighting WaveLinx LITE Quick Start Manual page 2

WaveLinx LITE Quick Start Guide: Configuring Acoustic Ceiling Sensors in Stand-Alone Mode
Key Concepts
Stand-Alone A quick configuration mode in the WaveLinx LITE
Mode Mobile App that allows Acoustic Ceiling Sensor
configuration through a Bluetooth connection.
The configuration is saved in the Acoustic Ceiling
Sensor but not in the Mobile App.
Provisioned A WaveLinx LITE device that has been configured
Device with the WaveLinx LITE Mobile App.
Unprovisioned A WaveLinx LITE device that has not been
Device configured and is still in Factory Mode (defaults).
Open the WaveLinx Mobile App in Stand-Alone Mode
The WaveLinx LITE Mobile App's Stand-Alone Mode does not
require a registered user account. Logging in as a registered user
is optional. Logging in allows access to advanced configuration
features including creation of templates to streamline the
configuration process where multiple devices share the same
settings.
Open Stand-Alone Mode (Not Logging In)
Follow the steps below to open Stand-Alone Mode without
logging into the WaveLinx LITE Mobile App:
Open the WaveLinx LITE App but do not login.
Tap Mode at the bottom of the screen.
Select Stand-Alone Mode.
2 www.cooperlighting.com
Out of the Box Operation
When the WaveLinx LITE Acoustic Ceiling Sensor is installed,
connected to the controlled switchpack or lighting load, and
powered, it will begin out of the box operation (Factory Mode).
• If the space is occupied, the controlled load will turn ON.
• Once the space is unoccupied for 20 minutes, the controlled
load will turn OFF.
• Daylight switching is disabled.
• If using the OCS-L-D-* model with a GMDS-W switch, the
switch will operate (toggle ON/OFF) the controlled load.
Stand-Alone Mode
Configure Device
Access Device Status
Create and Apply
Templates to Devices
Update Device Firmware
Open Stand-Alone Mode (Logged In)
Follow the steps below to open Stand-Alone Mode when logged in
as a registered user:
Open the WaveLinx LITE App and log in.
Open the Menu and tap
Select Stand-Alone Mode.
Stand-Alone Mode
Not Logged In Logged In
.