Dell Precision 410 Service Manual page 114

A-4 Dell Precision 410 Systems Service Manual
7DEOH $ 6\VWHP 6HWXS &DWHJRULHV
&DWHJRU\
Chassis Intrusion
Thermal Power-off
Keyboard Errors
System Password
Password Status
Boot Sequence
Setup Password
Auto Power On
FRQWLQXHG
)XQFWLRQ
Chassis Intrusion displays the status of the
system's chassis intrusion detector.
If the chassis is opened, the setting changes
from Not Detected to Detected, and the fol-
lowing message is displayed during the boot
routine at system start-up:
Alert! Cover was previously removed.
To clear this field and allow future intrusions to
be detected, make sure that the chassis cover
is closed, and then enter the System Setup
program during the system's POST. At Chassis
Intrusion, use the left- or right-arrow key to
choose Reset. This action changes the setting
to its default, Not Detected. If a setup pass-
word has been set, only the person who set
the password can clear the Chassis Intrusion
message.
When enabled, sets a timer to shut down the
system approximately 3 minutes after the
system BIOS detects an overtemperature
condition for a processor or hard-disk drive.
Enables or disables reporting of keyboard
errors during the POST.
Displays current status of system's password
security feature. Also is used to assign and
verify a new password.
Provides an extra measure of system security
by letting you set the system password to
Locked or Unlocked.
Determines whether the system boots from
diskette (if present) or hard-disk drive.
Restricts access to the System Setup
program.
Allows you to turn your computer system on
automatically on certain days of the week at a
preset time.