Treble Control - Rampage 1285300F Owner's Manual

TREBLE CONTROL

To adjust the treble level, first select the Treble
mode by pressing the Select button
the TRB indication appears on the display
panel. Within 5 seconds of choosing the
Treble mode, press the
Level Control to adjust the treble response as
desired. The treble level will be shown on the
display panel from a minimum of TRB--10 to a
maximum of TRB 10 (TRB 00 represents flat re-
sponse). The display will automatically return
to the normal indication 5 seconds after the
last adjustment or when another function is
activated. Adjusting the treble level will automati-
cally return the equalizer setting to the FLAT mode
from its previous setting.
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select
3
the Balance mode by pressing the Select button
until the BAL indication appears on the display
panel. Within 5 seconds of choosing the Balance
mode, press the button of the Level Control
to adjust the stereo balance to the left channel
speakers or the button of the control to adjust
it to the right channel speakers. The balance position
will be shown on the display panel from BAL 10L(full
left) to BAL 10R (full right). When the volume level
between the left and right speakers is equal,
BAL L=R will be shown on the display panel. The
display will automatically return to the normal
indication 5 seconds after the last adjustment or
when another function is activated.
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first se-
3
lect the Fader mode by pressing the Select button
until the FAD indication appears on the display
panel. Within 5 seconds of choosing the Fader
2
mode, press the or the
Control to adjust the front-rear speaker levels
as desired. The fader position will be shown on
the display panel from FAD 10R(full rear) to
FAD 10F (full front). When the volume level between
the front and rear speakers is equal, FAD F=R will
be shown on the display panel. The display will
automatically return to the normal indication 5 sec-
onds after the last adjustment or when an-
other function is activated.
until
When listening to music at low volume lev-
els, this feature will boost the bass and treble
ranges to compensate for the characteris-
or buttons of the
tics of human hearing. Press and hold the
BAND/LOUD button for 2 seconds to acti-
vate this feature as indicated by a beep tone
and LOUD ON appearing on the display
panel for about 5 seconds. (LOUD remains
on the display.) Pressing the button again
for 2 seconds will sound a beep tone and
LOUD OFF will appear on the the display for
about 5 seconds.
This button is used to mute the volume from
the system. By pressing the button, the indi-
cation MUTE will appear flashing on the dis-
play panel and the volume will be muted.
2
Pressing the Mute button again or activating
any other function of the unit will return to the
volume level setting in use before the Mute
function was activated.
During radio play, each time the button is
pressed, the radio band changes. The indi-
cations AM, F1, F2, or F3 will appear on the
display panel according to your selection.
Each time the Up Tuning button (
pressed, the radio will tune higher, seeking
the next strong station and stop. Similarly,
each press of the Down Tuning button
(
buttons of the Level
strong station. To manually seek a spe-
cific station, press the button in the appro-
priate direction until the desired frequency
is reached.
Press either button for longer than 2 sec-
onds; MANUAL will appear on the dis-
play. Now, when the Up or Down tuning
LOUDNESS CONTOUR (LOUD)
AUDIO MUTE
AM/FM BAND SELECTOR
MANUAL UP/DOWN (
SEEK TUNING
) will tune lower and stop at the next
/ )AND
) is
7 7 7 7 7
6 6 6 6 6