Rotenso CONTROL GOTE User Manual page 9

CANCEL it by press
NOTE: All programming should be operated within 5 seconds, otherwise the setting will be cancelled.
10. SWING function
1. Press the button SWING to activate the louver,
2. Long press or
• Never position Flaps manually, the delicate mechanism might seriously damaged!
• Never put fingers, sticks or other objects into the air inlet or outlet vents. Such
11. TURBO function (some units)
To activate turbo function, press the
Press again to cancel this function.
In COOL/ HEAT mode, when you select TURBO feature, the appliance will turn to quick
COOL or quick HEAT mode, and operate the highest fan speed to blow strong airflow.
12. MUTE function (some units)
1. Press
Do it again to deactivate this function.
2. When the MUTE function runs, the remote controller will display the auto fan speed, and
the indoor unit will operate at lowest fan speed to be quiet feeling.
3. When press FAN/ TURBO button, the MUTE function will be cancel. MUTE function can
not be activated under dry mode.
13. ECO function (some units)
In this mode the appliance automatically sets the operation to save energy.
Press the
Press again to cancel it.
NOTE: The ECO function is available in both COOLING and HEATING modes.
b. Press to activate the horizontal flaps to swing from up to down, the
on the remote display.
c. Press to active the vertical deflectors to swing from left to right, the
on the remote display.
d. Do it again to stop the swing movement at the current angle.
over 3 seconds to select more angles of the airflow direction.
accidental contact with live parts might cause unforeseeable damage or injury.
button to active this function, and
button, the
button.
NOTE
button, and
appears on the display, and the appliance will run in ECO mode.
Remote control - GOTE
will appear on the display.
will appears on the remote display.
User manual
EN
will appear
will appear
9