Dell Dimension 3100 Owner's Manual page 29

2 Right-click the Volume icon of the RAID volume you want to delete, and select Delete Volume.
3 On the Delete RAID Volume Wizard screen, click Next.
4 Highlight the RAID volume you want to delete in the Available box, click the right-arrow
button to move the highlighted RAID volume into the Selected box, and then click Next.
5 Click Finish to delete the volume.
Migrating to a RAID Level 1 Configuration
1 Set your computer to RAID-enabled mode (see page 26).
2 Click the Start button and point to All Programs→ Intel(R) Matrix Storage Manager→
Intel Matrix Storage Console to launch the Intel Storage Utility.
NOTE:
If you do not see an Actions menu option, you have not yet set your computer to
mode (see page 26).
3 On the Actions menu, click Create RAID Volume From Existing Hard Drive to launch the
Migration Wizard.
4 Click Next on the first Migration Wizard screen.
5 Enter a RAID volume name or accept the default.
6 From the drop-down box, select RAID 1 as the RAID level.
NOTE:
Select the hard drive that you want to use as your source hard drive (it should be the hard drive
containing the data or operating system files that you want to keep on the RAID volume).
7 On the Select Source Hard Drive screen, double-click the hard drive from which you want to
migrate, and click Next.
8 On the Select Member Hard Drive screen, double-click the hard drive to select the member
drive that you want to act as the mirror in the configuration, and click Next.
9 On the Specify Volume Size screen, select the volume size you want, and click Next.
NOTE:
In step 10, all data contained on the member drive will be removed.
10 Click Finish to start migrating, or click Back to make changes. You can use your computer
normally during migration process.
Rebuilding a Degraded RAID Level 1 Configuration
If your computer has reported a degraded RAID level 1 volume, you can manually rebuild the
computer's redundancy mirror to a new hard drive:
1 Click the Start button and point to Programs→ Intel(R) Matrix Storage Manager→ Intel
Matrix Storage Console to launch the Intel Storage Utility.
2 Right-click the available hard drive to which you want to rebuild the RAID level 1 volume,
and click Rebuild to this Disk.
3 You can use your computer while the computer is rebuilding the RAID level 1 volume.
RAID-enabled
Setting Up and Using Your Computer
29