Using Blank Cds And Dvds - Dell Dimension 3100 Owner's Manual

3 To copy the CD or DVD:
• If you have one CD or DVD drive, ensure that the settings are correct and click the Disc
Copy button. The computer reads your source CD or DVD and copies the data to a
temporary folder on your computer hard drive.
When prompted, insert a blank CD or DVD into the drive and click OK.
• If you have two CD or DVD drives, select the drive into which you have inserted your
source CD or DVD and click the Disc Copy button. The computer copies the data from
the source CD or DVD to the blank CD or DVD.
Once you have finished copying the source CD or DVD, the CD or DVD that you have
created automatically ejects.

Using Blank CDs and DVDs

CD-RW drives can write to CD recording media only (including high-speed CD-RW) while
DVD-writable drives can write to both CD and DVD recording media.
Use blank CD-Rs to record music or permanently store data files. After creating a CD-R, you
cannot write to that CD-R again (see the Sonic documentation for more information). Use
blank CD-RWs to write to CDs or to erase, rewrite, or update data on CDs.
Blank DVD+/-Rs can be used to permanently store large amounts of information. After you
create a DVD+/-R disc, you may not be able to write to that disc again if the disc is "finalized" or
"closed" during the final stage of the disc creation process. Use blank DVD+/-RWs if you plan
to erase, rewrite, or update information on that disc later.
CD-Writable Drives
Media Type
CD-R
CD-RW
DVD-Writable Drives
Media Type
CD-R
CD-RW
DVD+R
DVD-R
DVD+RW
DVD-RW
DVD+R DL
Read
Yes
Yes
Read
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Write
Yes
Yes
Write
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Setting Up and Using Your Computer
Rewritable
No
Yes
Rewritable
No
Yes
No
No
Yes
Yes
No
19