Replacing the Drive Panel
1 Follow the procedures in "Before You Begin" on page 57.
2 Align the drive panel tabs with the side-door hinges.
3 Rotate the drive panel toward the computer until it snaps into place on the front panel.
4 Grasp the sliding plate lever and pull it towards the top of the computer, snapping it into the
closed position to secure the drive panel.
Drives
Your computer supports a combination of these devices:
•
Up to two serial ATA hard drives
•
One FlexBay drive (floppy drive or Media Card Reader)
•
Up to two CD or DVD drives
76
Removing and Installing Parts
sliding plate lever
sliding plate
drive panel