Intel® Core™ Ultra 7 and Ultra 5 processors in a low profile fanless system built for the challenges of the IoT edge. With a 0 to 50°C operating temperature range, and a wealth of configuration options, the ML100G-56 was engineered with versatility in mind. 1.2 - Accessories If you purchased additional items such as mounting brackets, power supplies or terminal block connectors, they will be located in the system box or within the outer shipping carton.
DO_1 DO_0 The ML100G-56 supports an optional Isolated Digital I/O add-in card (OnLogic ADP120 DIO). This option allows for interfacing with digital logic applications. For a complete explanation of features, operating voltages, and safety information, please refer to the DIO expansion manual on the OnLogic support site - https://support.onlogic.com/documentation/adp120-dio/.
Page 11
The LAN ports on ML100G-56 support up to 2.5Gbps link speeds over standard shielded CAT5e or CAT6 cables. The connector is the industry standard RJ45 connector. The LAN link state is shown by the two LEDs enclosed in the port. The description is included below.
2.3 - Motherboard Connectors M.2 2242/2280 M-key (PCIe Gen 4 x 4) M.2 2230 E-key (Wi-Fi) (PCIe x1/ USB 2.0/ CNVi) M.2 2242 M-key (PCIe Gen 4 x4) SATA3 Port System Panel Header JP1 Header USB2 Header COM Port Header DC Jack (12V~24V)
Page 13
A full pinout table for this expansion slot is provided in Appendix B M.2 E-Key An M.2 E-Key port is present on the ML100G-56 motherboard to allow support for E-Key form-factor wireless expansion cards. Only 2230 form-factor cards are supported. The E-Key connector supports PCIe x1, USB 2.0, and CNVi.
Page 14
COM Port Header (RS-232/422/485) DCD# DTR# DSR# RTS# CTS# Dummy JP1 Header Setting Description Reserved JP for AT (Default) Reserved JP for Clear CMOS (Default) SIO AT Mode Clear CMOS DACC* (Default) * Auto clear CMOS when system boot improperly System Panel Header HDD LED+ PWR LED+...
3 - Mounting Instructions 3.1 - Wall Mount & DIN Rail Mounting The ML100G-56 has optional Wall Mount brackets (SKU : MTW101) and DIN Rail mounting brackets (SKU : MTW101-K) available for purchase. For Wall Mounting, follow steps below : Step 1: Align the four screw holes on the bottom of the system with the respective holes on the mounting brackets.
3.2 - VESA Mounting The ML100G-56 has an optional VESA mounting bracket (SKU : MTV100-K) available for purchase. Follow the steps below for mounting. Step 1: Align the four screw holes on the bottom of the system with the respective holes on the mounting bracket.
4 - Power Management 4.1 - Wake-Up Events The ML100G-56 supports multiple power states. The wake-up events can be configured in the BIOS. This section describes the supported power management functions and gives information on protection circuitry for power adapters.
5.1.2 Test Results 5.1.3 Test Result Summary The ML100G-56 with Intel Core Ultra 7 processor 155U operated upwards of 80% of its rated base clock speeds on the CPU cores while sustaining significant processor, memory and storage stress loads in an ambient temperature of 50ºC.
5.2 - Appendix B: Expansion port pinout 5.2.1 - M.2 M-Key Function Function 3.3 V 3.3 V LED# 3.3 V 3.3 V 3.3 V 3.3 V USB_D+ USB_D- SMB_CLK PERn0/SATA-B+ SMB_DATA PERp0/SATA-B- PETn0/SATA-A- PETp0/SATA-A+ PERST# CLKREQ# REFCLKn WAKE# REFCLKp CONNECTOR Key M CONNECTOR Key M CONNECTOR Key M CONNECTOR Key M...
CONNECTOR Key M CONNECTOR Key M CONNECTOR Key M CONNECTOR Key M SUSCLK PEDET 3.3 V 3.3 V 3.3 V 5.2.2 - M.2 E-Key Function Function 3.3 V USB_D+ 3.3 V USB_D- CNV_WGR_D1- CNV_RF_RESET# CNV_WGR_D1+ MODEM_CLKREQ CNV_WGR_D0- CNV_WGR_D0+ CNV_WGR_CLK- CNV_BRI_RSP CNV_WGR_CLK+ CNV_BGI_DT CNV_RGI_RSP...
PERST0# CLKREQ0# W_DISABLE2# WAKE0# W_DISABLE1# SMB_DATA CNV_WT_D1- SMB_CLK CNV_WT_D1+ RESERVED CNV_WT_D0- CNV_WT_D0+ CNV_WT_CLK- 3.3V CNV_WT_CLK+ 3.3V 5.3 - Appendix C: Regulatory Compliance 5.3.1 - CE The computer system was evaluated for medical, IT equipment, automotive, and maritime EMC standards as a class A device. The computer complies with the relevant IT equipment directives for the CE mark.
4. To protect against excessive RF exposure, maintain at least 20cm from any user and the RF antennas. Only use provided dual band antennas of 2dBi/2dBi gain. 5. Wall or ceiling mounting device requires use of OnLogic mounting plate or bracket. 6. Use M3x0.5mm Flat Head screws to attach mounting plate or mounting brackets to threaded holes on bottom or rear of chassis.
Part I, CSA C22.1. 17. Allow ample space for terminal block wiring connections such that the wires do not bend and are protected from accidental damage. 18. Install the device only with shielded network cables. 19. The installer should be experienced in aftermarket installation and familiar with general practices for installing electronics.
Page 24
11. Ne nettoyez pas l'appareil avec des liquides. Le châssis peut être nettoyé uniquement avec un chiffon sec ou un plumeau. Pour éviter de se blesser et/ou d'endommager l'appareil, l'appareil doit être éteint et toutes les alimentations et autres périphériques doivent être déconnectés avant le nettoyage.
Need help?
Do you have a question about the ML100G-56 and is the answer not in the manual?
Questions and answers