Bluetooth Phone - Soundstream RESERVE WHD14+ Owner's Manual

Bluetooth Phone

Bluetooth Phone:
After the mobile Phone is connected with the
source unit via Bluetooth(HFP), the user can
go through the source unit.
Make a phone call. Touch the Phone icon in
Main Menu to go to BT Phone mode. Please
note it needs to connect the microphone for
phone calls.
Keypad. Tap it to enter call mode.
History. Tap it to show the call record,
missed, received and dialed calls.
Contact. Tap it to show the phonebook
of connected device.
BT Setup. Tap it to set Auto answer and
Microphone gain.
Make a call or Accept the incoming call.
Backspace, tap it to clear the incorrect
dial digit.
Make a Call:
1. Touch the icon to enter dial screen.
2. Using the keypad , touch 0-9,*,# , enter the
desired number to dial. If you input an
incorrect number, touch the
keypad to delete the incorrect number.
3. Once hte correct bumber appears on the
screen, touch the
interface.
4 To end the call, touch the icon
on the screen.
Interchange between phone and source unit.
ON / OFF the Microphone function.
Display the Keypad.
icon on the
icon to go to daling
Receive an incoming call:
If the Phone is connected with the source
unit via Bluetooth, when an incoming call,
below screen will be shown:
Press to answer the incoming call.
Press to reject the incoming call.
History:
Touch the
call combined list.
Slide the bar at the right up and down to
display a call logs.
Contacts:
Touch the icon
the connected mobile Phone.
To make a call from the phonebook, simply
touch the contact's name
22
icon to display the
to access the phone book of