Installing The 3-Cell Primary Battery - NEC VERSA TXI 3-CELL PRIMARY BATTERY Manual

Continue to hold the battery release latch as you slide the battery out of the system.
4.
A – Connector in Battery Bay
B – Battery Release Latch

Installing the 3-Cell Primary Battery

Install your new battery as follows:
Locate the alignment grooves on either edge of the battery.
1.
Locate the alignment grooves inside the battery bay.
2.
Align the grooves on the battery with the grooves in the bay.
3.
Slide the battery into the bay until securely locked into place.
4.
A – Connector in Battery Bay
B – Battery Release Latch
Turn the system over.
5.
Removing the battery
C – Existing Primary Battery
Inserting the battery
C – Alignment Grooves
D – 3-Cell Primary Battery
NEC Versa TXi 3-Cell Primary Battery 3