Hytek SPT60A.K1 Technical Data Manual page 5

INSTRUCTIONS FOR USE
1. Switch on pump.
2. Place nozzle spout in the fuel tank.
3. Squeeze nozzle trigger to dispense fuel.
4. On completion of delivery, release nozzle trigger and remove
nozzle from fuel tank.
OPERATION WARNING - FAILURE TO OBSERVE THE
WARNINGS BELOW MAY LEAD TO THE PUMP UNIT
BEING DAMAGED:
1. Please ensure that the delivery hose is stowed correctly after
each use to prevent it being run over by a vehicle.
2. Do not run the pump dry.
3. Do not run the pump for prolonged periods on bypass. (Nozzle
closed)
S653/3