Princess 182258 User Manual page 5

USE
Using the appliance
•
Put the main plug in an earthed wall socket.
• Pull the basket A out of the airfryer
3
• Put the frying plate in the basket.
Note: Never use the appliance without frying plate.
• Put the ingredients into the basket A
3
• Do not use oil or any other liquids in the air fryer. (Maximum ½ teaspoon of oil may be added when
cooking fries or steak).
• Slide the basket A into the airfryer
3
• Press the on/off switch. The display B will become active.
d
• Select a program or manually adjust the desired temperature and time of cooking.
• The appliance features an automatic shake reminder when ingredients need shaking during the cooking
process. This feature ensures optimal results by prompting timely intervention, ensuring thorough mixing
and even cooking.
• When you hear the timer beep, the set preparation time has elapsed. The device will shut off after 20
seconds. Pull the basket A out of the appliance and place it on a heat-resistant surface.
3
• Check if the ingredients are ready. If the ingredients are not ready yet, simply slide the basket back into
the appliance and set the timer to a few extra minutes.
• To turn off the device, press the on/off button until the display turns off
MANUAL SETTING:
• Press the time + B and time – B icon to set the desired cooking time. The time will increase or
f g
decrease in 1-minute increments.
• Press the temperature + B or temperature - B
u
The temperature will increase or decrease in 5°C increments.
• The temperature can be set between 80°C and 200°C.
• The timer can be set between 1 and 60 minutes.
Note: It is not necessary to preheat the device.
PROGRAM SETTING:
• See for presetting information the table below:
Program Icon Quantity
Fries 500 g
Bread 300g - 500g
Steak 200 g
Fish 200 g
Drumsticks 600 g
Shrimp 200 g
Vegetables 200 g
© Princess | Digital Airfryer
icon to program to the desired cooking temperature.
i
Default temperature/time Time when
preheated
200°C / 20 minutes 18 minutes
160°C / 30 minutes 28 minutes
180°C / 15 minutes 13 minutes
180°C / 20 minutes 18 minutes
190°C / 25 minutes 23 minutes
180°C / 10 minutes 8 minutes
150°C / 10 minutes 8 minutes
8 | 01.182258.01.001
Manual mode N/A
Keep warm N/A
function
• After the cooking time has elapsed, the appliance will beep 5 times before it switches off automatically.
The fan will continue running for about 30 seconds to cool down the unit.
SHAKE FUNCTION
• When a program is halfway, the appliance will show the shake reminder icon.
• The Shake reminder function is only enabled if the set cooking time is equal to or more than 6 minutes.
• The shake reminder is indicated by the sound of 1 beep. The display will show a flashing "SHAKE".
• Pull the basket A out of the airfryer
3
• Shake the basket a few times. Be careful to not shake too hard so that the hot ingredients will not fall out.
• Slide the basket A into the airfryer
3
• For the Fries program B , the device will suggest to shake the fries every 5 minutes.
8
• The shake reminder will continue to flash if not completed, but will continue the program. After
completion, the shake reminder will also turn off.
START/PAUSE BUTTON
• Press the start/pause button B to pause the program.
o
• Pressing the start/pause button again will start the cooking process based on the shown settings on the
display.
• When the basket is removed from the device, the device will automatically pause its program.
• When entering the pause mode, the heating tube will immediately stop working. The fan will work for 20
seconds before stopping. The digital screen displays the remaining time and the current temperature. It
will flash synchronously with the currently working menu button. The two middle points of the display will
not flash.
• When paused, press and hold the pause/start button to exit the pause state and enter the standby
state.
• If there is no operation within 5 minutes in the pause state, the device will enter standby mode.
Note: The power button the "+" and "-" keys are always on and can be operated normally. All other buttons
are off and inoperable.
PREHEAT FUNCTION
• Press the preheat button B . The button will start flashing, indicating that the preheat function is turned
p
on.
•
Press the power key to start the preheating process. The button light will stay on and the display will
show "PrE"
• The display B shows Add when preheating is complete.
a
Note: If the preheating function is turned on in the selected menu, the default heating time will be reduced
by 2 minutes.
Note: The preheating function can be turned off or on before starting work. After starting, the operation will
be invalid and the heating time will be updated accordingly.
KEEP WARM FUNCTION
• Press the keep warm button B . The keep warm button will start flashing, indicating that the function is
s
selected.
• Press the pause/start button B to start the function.
o
•
The program lasts 15minutes on 80°C.
• The display will show the remaining time and temperature. If the countdown time is less than 1 minute, it
User manual
180°C / 20 minutes 20 minutes
80°C / 15 minutes 15 minutes
9