Advertisement
Using Windows Explorer, go to the bootdisk directory and double click on makeboot.exe to
4.
execute. The MS-DOS window appears.
Follow the directions in the window to specify the diskette disk drive (typically A or B) and
5.
create disks. Label the disks as they are created.
After creating all four disks, put the first diskette back in the diskette drive.
6.
Launch Notepad.
7.
In Notepad, open the file txtsetup.sif from diskette 1.
8.
Use the Find command from the Edit pull-down menu to search for 0644. Notepad locates
9.
the following line in the file:
USB|VID_0644&PID_0000 = "usbstor"
Directly under that line, insert in the following line:
10.
USB\VID_0644&PID_1000 = "usbstor"
Save the txtsetup.sif file back onto the diskette. You have now created setup disks that
11.
work with the NEC Versa DayLite/UltraLite USB CD-ROM.
Installing Windows 2000 Using the Setup Floppy Diskettes
Complete the steps below to run the disks you created in the previous procedure.
Remove the Windows 2000 CD-ROM from the drive.
1.
Insert newly created Windows 2000 setup boot disk 1 into the diskette drive.
2.
Note
diskette drive.
Reboot the system.
3.
Put the Windows 2000 CD in the CD-ROM drive.
4.
Follow the on-screen instructions to install Windows 2000. Your Windows 2000 system
5.
now recognizes the USB CD-ROM drive.
4 NEC Versa DayLite/UltraLite Release Notes
Do not insert the Windows 2000 CD until you have rebooted the system using the
819-200724-000
04/2001
*819-200724-000*
Advertisement
