1 Follow the procedures in "Before You Begin" on page 131.
2 Turn the computer over and loosen the four captive screws along with the
M2.5 x 5-mm screw. Remove the module cover.
1
M2.5 x 5-mm screw
NOTICE:
To prevent damage to the memory module connector, do not use tools to
spread the memory module securing clips.
3 Use your fingertips to carefully spread apart the securing clips on each end
of the memory module connector until the module pops up.
4 Remove the module from the connector.
1
2
captive screws (4)
Adding and Replacing Parts
2
141