Updating The Pincode Ax Firmware - Simons Voss Technologies PinCode AX Manual

PinCode keypad AX

8. Updating the PinCode AX firmware

(Manual)
You can update the firmware for your PIN code keypad AX yourself using
the AX firmware updatetool and a SmartStick AX.
1. Press 0 and hold for two seconds.
9 PIN code keypad AX flickers green and beeps.
9 PIN code keypad AX stays in programming mode for half a minute
and can be found with AX firmware update.
2. Transfer the new firmware with AX firmware update.
PIN code keypad AX beeps during transmission.
9
9 PIN code keypad AX beeps and flashes red three times.
3. Write down the current firmware version on the rear of the PIN code
keypad AX.
Firmware updated successfully.
9
8. Updating the PinCode AX firmware
23 / 34