Machine Components; Ce Declaration Of Conformity - Collomix MIXBRO M110 Original Operating Instructions

Technical data
Rated power/Current consumpti on: 1010 W
Power supply:
Frequency:
No-load speed: fi rst gear
second gear
Rpm under load: fi rst gear
second gear
Maximum mixing tool diameter:
Weight w/o mixing tool:
Protecti on class:

Machine components

1 Release butt on for ON/OFF switch
2 ON/OFF switch
3 Gear selecti on switch
4 Guard handle
5 Handles
6 Venti lati on slits
7 Neck of the machine
8 Mixing shaft
9 HEXAFIX coupling
10 Mixing tool
Noise/vibrati on levels
Measured values determined in accordance with EN
62841. The A-weighted noise level of the machine is
typically:
MIXBRO
Sound pressure level
L [dB(A)]
pA
M110 90 dB(A)
M130 92 dB(A)
M150 92 dB(A)
Uncertainty K = 3 dB
Overall vibrati on level (for mixing of mineral
materials)
MIXBRO Emission level a
M110
M130
M150
Uncertainty K = 1,5 m/s
M110
230 V
50 Hz
- 800 min
-1
- 630 min
-1
120 mm
4,3 kg
/ II
Sound power level
L [dB(A)]
WA
98 dB(A)
100 dB(A)
101 dB(A)
[m/s ]
2
h
1,1 m/s
2
1,4 m/s
2
1,3 m/s
2
2
M130
1300 W
230 V
50 Hz
- 900 min
-1
- 600 min
-1
140 mm
4,5 kg
/ II
WARNING:
The measured values which are provided apply to new
machines. Noise and vibrati on levels change with day-to-
day use.

NOTE
The vibrati on level given in these instructi ons was
measured in accordance with a standardized method of
measurement as defi ned in EN 62841 and can be used
for the purposes of comparing electrical tools with each
other. It is also suitable for a preliminary esti mati on
of vibrati on strain. The vibrati on level which is given
represents vibrati on level for the primary use of the
electrical tool. If, however, the electrical tool is used for
any other purposes, with diff erent plug-in tools or with
insuffi cient maintenance, the vibrati on level may vary.
This can result in a signifi cantly higher level of vibrati on
strain over the work period as a whole.
For a precise esti mati on of the vibrati on strain the ti mes
when the machine is switched off have to be taken into
account as well, as do the ti mes when it is running but is
not actually being used. This can result in a signifi cantly
reduced level of vibrati on strain over the work period as
a whole.
CE Declarati on of Conformity
We declare under our sole responsibility that the
products *1) comply with the following standards or
normati ve documents *2) as well as the provisions of
the applicable directi ves *3). Technical documentati on
can be requested from *4) – for detailed informati on
see page 2.
M150
1500 W
230 V
50 Hz
- 600 min
-1
- 930 min
-1
- 410 min
-1
- 650 min
-1
140 mm
5 kg
/ II
EN