Wireless Mini-Card - Dell Vostro 1000 Owner's Manual

Wireless Mini-Card

If you ordered a Mini-Card with your computer, the card is already installed.
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE:
To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
1 Follow the procedures in "Before You Begin" on page 89.
2 Remove the hinge cover. See "Hinge Cover" on page 100.
3 Remove the keyboard. See "Keyboard" on page 101.
4 If a Mini-Card is not already installed, go to step 5. If you are replacing a
Mini-Card, remove the existing card:
Disconnect the two antenna cables from the Mini-Card.
a
1
1 Mini-Card
2
2 antenna cable connectors (2)
Adding and Replacing Parts
103