sweeek. MADELEINE Manual page 30

EN
IGNITING THE PRINCIPAL BURNERS
1. Open the hood and make sure that all the switches are «OFF».
2. Open the gas valve and wait a few seconds.
3. Press and hold the control burner to ignite and turn it anti-clockwise, positioning it to «MAX»
to light the flame. Repeat this various times if necessary.
4. If this ignition process doesn't work, turn the button back to «OFF» and wait a few minutes,
then repeat the previous steps or try to light the gas with a match.
5. Once the initial burner has been lit, repeat stage no. 3 to light the other burners.
6. Adjust the flame to the desired strength, with the aid of the switch.
WARNING:
lid closed and all the burners on « MAX ». Doing this will clean all the elements of any
residue left during the production process.
WARNING :
LIGHTING THE LATERAL BURNER
1. Remove the cover from the side burner and make sure the switch is in the «OFF» position.
2. Open the gas valve and wait a few seconds.
3. Press and hold the control button for the side burner and turn it anti-clockwise, positioning it
to «MAX» to light the flame. Repeat this various times if necessary.
4. If this ignition process doesn't work, turn the button back to «OFF» and wait a few minutes,
then repeat the previous steps or try to ignite the burner with a match.
5. Once the initial burner has been lit, repeat stage no. 3 to light the other burners.
6. Adjust the flame to the desired strength, with the aid of the control switch.
SWITCHING YOUR BARBECUE OFF
1. Shut the gas valve, directly at the cylinder.
2. Then, when the flames are extinguished, turn all the switches «OFF».
3. For maximum safety when not in use, you can also disconnect the pipe from the gas cylin-
der.
30
Before cooking the first item, let the bbq heat up for 15 minutes, keep the
If you smell gas, turn off the gas source and lift the lid of the barbecue.
4/09/2024