Table of Contents
Advertisement
Adjusting the picture
The contrast, brightness, sharpness, color and tint can be
adjusted as desired.
Example: Adjusting the contrast
Press the MENU button on the remote controller to dis-
play the MAIN MENU on the screen, then...
1. Use the
and
buttons to select "PICTURE", then
press the "OK" button.
The "PICTURE" screen appears.
2. Use the
and
buttons to select "CONTRAST".
P I C T U R E
PICTURE MODE
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
COLOR TEMP.
NR
RETURN
EXIT
3. Use the
and
buttons to adjust the picture.
CONTRAST
* If neither the
or
onds, the current setting is set and the previous screen
reappears.
:
MEMORY
R
G
:
2
:
NR-1
OK
button is pressed within 5 sec-
4. Press the "OK" button.
The contrast adjustment is completed.
PICTURE MODE
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
COLOR TEMP
NR
RETURN
EXIT
5. Once the adjustment is completed ...
Press the "MENU" button.
All menus disappear.
Note: If "CAN NOT ADJUST" appears ...
When trying to enter the PICTURE submenu, make sure
PICTURE MODE is set to MEMORY.
Information
Picture adjustment screen
CONTRAST ....... Changes the picture's contrast.
BRIGHTNESS .... Changes the picture's brightness.
SHARPNESS ..... Changes the picture's sharpness.
COLOR .............. Changes the color density.
TINT ................... Changes the picture's tint. Adjust
Adjusting the computer image
Only the contrast and brightness can be adjusted when
a computer signal is connected.
Restoring the factory default settings
Select "RESET" under the "PICTURE MODE" settings.
E – 20
P I C T U R E
:
MEMORY
R
G
:
2
:
NR-1
OK
Adjusts picture detail of VIDEO
display.
for natural colored skin, back-
ground, etc.
Advertisement
Table of Contents
