Table of Contents
Advertisement
Adjusting the color to the desired quality
Use this procedure to adjust the white balance for bright pic-
tures and dark pictures to achieve the desired color quality.
Example: Adjusting the "WHITE BALANCE"
Press the MENU button on the remote controller to dis-
play the MAIN MENU on the screen, then...
1. Use the
and
buttons to select "PICTURE", then
press the "OK" button.
The "PICTURE" screen appears.
2. Use the
and
buttons to select "COLOR TEMP".
P I C T U R E
PICTURE MODE
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
COLOR TEMP.
NR
RETURN
EXIT
3. Use the
and
buttons to select "PRO".
The mode switch as follows when the
are pressed:
1
2
3
PRO
COLOR TEMP.
If neither the
or
button is pressed within 5 seconds,
the current selection is set and the previous screen
reappears.
4. Press the "OK" button.
The "WHITE BALANCE" screen appears.
5. Us
ons to select "R-GAIN".
e the
and
butt
W H I T E B A L A N C E
GAIN
RED
GREEN
BLUE
BIAS
RED
GREEN
BLUE
RETURN
EXIT
:
MEMORY
R
G
:
2
:
NR-1
OK
and
buttons
:
PRO
OK
6. Adjusts the white balance using the
R-GAIN
* If neither the
onds, the current setting is set and the previous screen
reappears.
7. Press the "OK" button.
The white balance has now been adjusted.
W H I T E B A L A N C E
GAIN
RED
GREEN
BLUE
BIAS
RED
GREEN
BLUE
RETURN
EXIT
8. Once the adjustment is completed...
Press the "MENU" button.
All menus disappear.
Information
Adjusting the white balance
RGB-GAIN .... White balance adjustment for signal
level
RGB-BIAS ..... White balance adjustment for black
level
Restoring the factory default settings
Restoring the factory default settings
Select "RESET" under the function menu. Note that this
also restores other settings to the factory defaults.
E – 22
and
or
button is pressed within 5 sec-
OK
buttons.
Advertisement
Table of Contents
