Advertisement
Opening the Modem Cover
To connect a telephone cable to your MobilePro 900c, open the modem cover to
about a 45-degree angle from the side of the MobilePro. Insert the clip side of the
telephone cable into the modem cover (see the following figure).
See your NEC MobilePro 900c User's Guide for detailed modem connection
information.
A – Modem Connector
B – Modem Cover at 45-Degree Angle;
the modem cover more than the 45-degree angle.
Connecting a Device to the USB Port
Before connecting a USB device to the MobilePro 900c, install a ferrite core on
the USB cable. Installation of the ferrite core on the USB cable reduces radio
interference when you use a USB device connected to the MobilePro 900c. Ferrite
cores ship with the MobilePro 900c.
Note
The USB PC Connect cable that ships with the MobilePro 900c
comes with a ferrite core installed. You do not need to install a ferrite core on
this cable.
Install a ferrite core on any other USB cable you connect to the MobilePro,
including the cable attached to a USB mouse or USB keyboard.
2
Clip Side of Telephone Cable Connector Goes Here
To prevent damage to the modem cover, do not open
Advertisement
