Table of Contents
Advertisement
•
Ensure that any power strips being used are plugged into an electrical
outlet and are turned on.
•
Ensure that the electrical outlet is working by testing it with another
device, such as a lamp.
•
Ensure that the main power cable and front panel cable are securely
connected to the system board (see your Service Manual at
support.dell.com).
I
F T H E P O W E R L I G H T I S B L U E A N D T H E C O M P U T E R I S N O T R E S P O N D I N G
•
Ensure that the display is connected and powered on.
•
If the display is connected and powered on, see "Beep Codes" on page 34.
I
F T H E P O W E R L I G H T I S B L I N K I N G B L U E
Press a key on the keyboard, move the mouse, or press the power button to
resume normal operation.
I
F T H E P O W E R L I G H T I S B L I N K I N G A M B E R
electrical power, a device might be malfunctioning or incorrectly installed.
•
Remove and then reinstall all memory modules (see your Service Manual
at support.dell.com).
•
Remove and then reinstall any expansion cards, including graphics cards
(see your Service Manual at support.dell.com).
F T H E P O W E R L I G H T I S S T E A D Y A M B E R
I
may be malfunctioning or incorrectly installed.
•
Ensure that the processor power cable is securely connected to the system
board power connector (see your Service Manual at support.dell.com).
•
Ensure that the main power cable and the front panel cable are securely
connected to the system board connector (see your Service Manual at
support.dell.com).
L I M I N A T E I N T E R F E R E N C E
E
•
Power, keyboard, and mouse extension cables
•
Too many devices connected to the same power strip
•
Multiple power strips connected to the same electrical outlet
The computer is in standby mode.
—
—
There is a power problem, a device
—
Some possible causes of interference are:
—
The computer is receiving
Troubleshooting
—
45
Advertisement
Table of Contents
Troubleshooting
