Download
Share
Print this page
  1. Manuals
  2. Brands
  3. HAMOKI Manuals
  4. Fryer
  5. DGF-26L
  6. Instruction manual

HAMOKI DGF-26L Instruction Manual

Freestanding electric open fryer
Hide thumbs

Advertisement

Quick Links

Download this manual
Executive standard: IEC 60335-2-37-2017
Freestanding Electric
pen Fryer
O
DGF-26L/DFG-D26L/Auto-D26L
INSTRUCTION MANUAL
Read this manual carefully prior to use.
Technology is subject to change without notice.

Advertisement

loading
Need help?

Need help?

Do you have a question about the DGF-26L and is the answer not in the manual?

Questions and answers

Related Manuals for HAMOKI DGF-26L

Summary of Contents for HAMOKI DGF-26L

  • Page 1 Executive standard: IEC 60335-2-37-2017 Freestanding Electric pen Fryer DGF-26L/DFG-D26L/Auto-D26L INSTRUCTION MANUAL Read this manual carefully prior to use. Technology is subject to change without notice.
  • Page 2 Main technical parameters DGF-26L DGF-D26L Auto-D26L DIMENSIONS (WxDxH): 400 x 780 x 1160 mm 790 x 780 x 1160 mm 860 x 800 x 1210 mm CAPACITY: 26 L (21.5 L oil) 2 x 26 L (21.5 L oil) TIMER:...

  • Page 3: Safety Warning

    SAFETY WARNING In order to ensure the user's safety and prevent personal injury, electric shock, poisoning, or fire and machine malfunction, please be sure to observe and clarify the following precautions: 1. Please read the instruction manual carefully before use, and keep it safe in case of operator change, future maintenance or other reference.

  • Page 4: Installation Precautions

    9. Cover of power unit box shall not be opened or it has to be opened by licensed technician, or it might result in personal injury. 10. The waterproof level is: IPX4. Therefore, it is strictly forbidden to wash with water or flush with jet water.

  • Page 5: Operational Precautions

    5. Where there might be no correct grounding facilities. 6. Where children or handicapped people, people with mental illness may possibly reach. 7. Pay attention to possible pollution lead by frying. Cooker hood shall be fixed wherever fryer locates. OPERATIONAL PRECAUTIONS 1.

  • Page 6: Cleaning Precautions

    3. Beware of using chemical cleaners that are suitable for use with aluminium. Corrosion can occur with many products. Particularly those containing caustic soda. Hamoki cannot accept responsibility for damage caused using corrosive cleaning products. 4. Be careful when cleaning the drainpipe and drain valve. There will be debris in the drainpipe.
  • Page 7 2. Proper height of oil level is expected during operation, oil level shall be in between “MIN” and “MAX” mark in the machine. CONTROL PANEL OPERATION INSTRUCTIONS INDICATOR LIGHT (NO. ) INSTRUCTIONS FOR USE control display window; waiting indicator; waiting done indicator right basket running indicator;...

  • Page 8: Basic Operating Procedures

    plus key; （B） minus key; （C） program key/right key （D） right basket run key （E） left basket run key （F） （G） program key BASIC OPERATING PROCEDURES POWER OFF: When the controller is powered on, it will display "OFF". After the controller is fully lit and reset, it will display "FRYER CONTROLLER"...
  • Page 9 STANDBY MODE: Press the key to display “IDLE---”, which means the idle mode is turned on. (Idle mode is not required, internal parameter SP-8 is set to ON). CLEAN-OUT MODE: Long press the key to enter the cleaning mode. After the temperature reaches the cleaning temperature, the timer starts.
  • Page 10 INFORMATION VIEW: Press to check the information， CODE DESCRIPTION “--106℃--” Actual temperature “SETPT = 105℃” Set temperature “FILTER: 0% USED” Oil filter reminder remaining cycle Time and calendar “01：46P WED OCT-06” MENU FUNCTION: Press and hold key for 5 seconds，the controller displays “L-2”.
  • Page 11 FILTER LOCK: If the oil filter function is used, the oil filter prompt will appear when the number of frying or the cumulative percentage reaches the reminder time limit. If the oil filter lock function is used, when the number of times of frying or the cumulative percentage reaches the reminder time limit, the oil filter lock state will be entered.

  • Page 12: Wiring Diagram

    WIRING DIAGRAM: Internal Parameters INTERNAL PARAMETERS: Select the SP PROG menu, enter the password 1,1,1, and enter the internal parameter setting. The controller displays the specified parameters，press adjust，press to change the parameters. After setting is completed, press and hold key to save and exit. PARAMETER SETTING CODE DESCRIPTION...

  • Page 13: Factory Parameters

    SP-8C Enter idle mode when oil is melted SP-9 oil filter 1. OFF 2. MIXED, 3. GLOBAL SP-9A Percentage of oil filter reminder SP-9B Is the oil filter unlocked? SP-9C Filter lock percentage 100% SP-9D Operating temperature with oil filter locked SP-10 Program selection key function 1.

  • Page 14: Initialisation Parameters

    F-5 OUTPUT MIN TIME Minimum (0~99）S heating output F-6 TEMP CONTROL DEAD temperature (0~10）℃ dead zone PREHEAT/IDLE MODE TEMPERATURE CONTROL PARAMETERS F-7 TEMP PROPORTION 40(0= bit type heating) (0~99）℃ temperature proportional coefficient F-8 PID CYCLE TIME 0 (1 = PID control, 0 = (0~99）S operation P control)
  • Page 15 time. For the disassembly of oil pump, please refer to the "Oil pump diagram" section. 7. Pay attention to oil level when oil is filled, oil level filled shall be controlled in between top and bottom limit. 8. It is strictly forbidden to pump oil without oil filter paper installed. MAINTENANCE AND UPKEEP OF THE MACHINE 1.
  • Page 16 OIL PUMP DIAGRAM...
  • Page 17 Electric Principle Diagram...

This manual is also suitable for:

Dfg-d26lAuto-d26l