SMC Networks WBR14-G2 - annexe 3 Manual page 83

Parameter
Password
Connection Policy
Fragmentation
half-open wait
TCP SYN wait
TCP FIN wait
TCP connection
idle timeout
UDP session idle
timeout
DoS Detect Criteria
Total incomplete
TCP/UDP
sessions HIGH
Total incomplete
TCP/UDP
sessions LOW
Incomplete
TCP/UDP
sessions (per min.)
HIGH
Incomplete
TCP/UDP
sessions (per min.)
LOW
Maximum
incomplete
TCP/UDP
sessions number
from same host
Defaults Description
Enter your email account password.
10 secs Configures the number of seconds that a packet
state structure remains active. When the timeout
value expires, the router drops the unassembled
packet, freeing that structure for use by another
packet.
30 secs Defines how long the software will wait for a TCP
session to reach an established state before
dropping the session.
5 secs Specifies how long a TCP session will be managed
after the firewall detects a FIN-exchange.
3600 secs The length of time for which a TCP session will be
(1 hour)
managed if there is no activity.
30 secs The length of time for which a UDP session will
be managed if there is no activity.
300 Defines the rate of new unestablished sessions that
sessions will cause the software to start deleting half-open
sessions.
250 Defines the rate of new unestablished sessions that
sessions
will cause the software to stop deleting half-open
sessions.
250 Maximum number of allowed incomplete
sessions
TCP/UDP sessions per minute.
200 Minimum number of allowed incomplete
sessions
TCP/UDP sessions per minute.
10 Maximum number of incomplete TCP/UDP
sessions
sessions from the same host.
S
ECURITY
4-41