System Requirements; Hardware Description - SMC Networks WBR14-G2 - annexe 3 Manual

I
NSTALLATION

System Requirements

You must meet the following minimum requirements:
• Internet access from your local telephone company or Internet Service
Provider (ISP) using a DSL modem or cable modem.
• A computer with a CD-ROM drive
• Windows (98 or later), MacOS (9.x)
• An up to date web browser:
•
•

Hardware Description

The BARRICADE connects to the Internet or to a remote site using its
WAN RJ-45 port linked to a modem. It also can be connected directly to
your PC or to a local area network using the Fast Ethernet LAN port.
Access speed to the Internet depends on your service type. Full-rate ADSL
provides up to 8 Mbps downstream and 1 Mbps upstream. G.lite (or
splitterless) ADSL provides up to 1.5 Mbps downstream and 512 kbps
upstream. However, you should note that the actual rate provided by
specific service providers may vary dramatically from these upper limits.
Data passing between devices connected to your local area network can
run at up to 100 Mbps over the Fast Ethernet port and 54 Mbps over the
built-in wireless network adapter.
The BARRICADE includes an LED display on the front panel for system
power and port indications that simplifies installation and network
troubleshooting.
2-2
Internet Explorer 5.5 or later
Mozilla 1.7/Firefox 1.0 or later