SMC Networks WBR14-G2 - annexe 3 Manual page 119

Troubleshooting Chart
Symptom
Management Problems
Cannot connect
using the web
browser
Forgot or lost
the password
Action
• Be sure to have configured the BARRICADE with a
valid IP address, subnet mask, and default gateway.
• Check that you have a valid network connection to the
BARRICADE and that the port you are using has not
been disabled.
• Check the network cabling between the management
station and the BARRICADE.
• Press the Reset button on the bottom panel (holding
it down for at least six seconds) to restore the factory
defaults.
T
ROUBLESHOOTING
A-3