Playing Discs; Loading Discs - Aiwa Z-VR55 Operating Instructions Manual

CD PlmAYMIJG
PLAYING DISCS :
PLAY I-5
EDITI
CHECK
RANDOM
REPEAT
0-9,+10
DIRECT
LOADING DISCS
Press CD, then press A OPEN/CLOSE to open the
disc compartment. Load disc(s) with the label side
up.
To load one or two [~, place the disc(s) on the tray(s) in the
direction of the arrows as illustrated.
/T-m
To load three to five discs, press DISC CHANGE to rotate the
trays after placing two discs. Place the next disc on empty tray.
Each time DISC CHANGE is pressed, the trays rotate and one
disc can be placed.
After placing the dliscs, press 40 PEN/CLOSE to close the
disc compartment.
The display shows the information of the disc to be played.
Tray number of the
disc to be played
Total playing time
I
Total number of tracks
Load discs.
b,
;;8"
B
To play all discs in the disc compartment, press E. ,; ;:
Play begins with the disc on tray 1.
g
Number of track being played Elapsed playing time
g:
i
To dav one disc onlw press one of DISC DIRECT PLAY
s
1-5.
The selected disc is played once.
d
%U
Selected disc tray number Elaps~d playing time
~
I
To play with the remote control
Press DIRECT, then press one of the numbered buttons 1 to 5
within 3 seconds to select a disc.
To stop play, press .
To pause play, press II, To resume play,-press again.
To search for a particular point during playback, keep ++
or > pressed and release the button at the desired point.
To skip to the beginning of a track during playback, turn
MULTI JOG or press + or > repeatedly.
To remove discs, press AOPEN/CLOSE.
You can onlv remove the two discs that face VOU. W hen the disc(s)
to be removed does(do) not face you, press DISC CHANGE
repeatedly.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins.
When A OPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.
To check the remaining time
During play, press EDIT/CHECK on the remote control. The
amount of time remaining until all tracks finish playing is
displayed. To restore the playing time display, repeat the above.
Selecting a track with the remote control
1 Press DIRECT, then press one of the numbered buttons 1 to
5 within 3 seconds to select a disc.
2 Press numbered buttons O-9 and +1O to select a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and O.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrurXinq dav.
1
2
3
Press DISC CHANGE.
Two discs can be replaced.
Remove the discs and replace with other discs.
To replace the other two discs, press DISC CHANGE again.
Press AOPEN/CLOSE to close the disc compartment.
ENGLISH
10