SMC Networks NAS02 User Manual page 97

To change this . . .
Enable quota for all users
Quota size on the SATA disk
Administrator password
Users
Set the Quota Size of guest on
the SATA disk
Administrator password
2. After making the necessary changes, click Apply after keying in the
Administrator password for all users in the upper segment or select one
specific user in the lower segment and set his/her quota to No limit or Quota
Size, then key in the Administrator password and click Apply.
3. When the confirmation message appears, click OK for the changes to take
effect.
Do this . . .
Click the checkbox to set quota for all
Windows users.
In the Quota size on the SATA disk field, enter
the quota size (MB).
In the Administrator password field, enter the
password for logging in to the Storage System
Management. The password is case-sensitive.
NOTE: Maximum number of characters is 8.
Can include any printable ASCII characters but
not ( ' ).
Displays a list of available users.
For setting the quota of the specific user on the
SATA disk. In the Set the Quota Size of guest
on the SATA disk field, select No Limit or Quota
Size and enter the quota size (MB).
In the Administrator password field, enter the
password for logging in to the Storage System
Management. The password is case-sensitive.
NOTE: Maximum number of characters is 8.
Can include any printable ASCII characters but
not ( ' ).
89