SMC Networks NAS02 User Manual page 145

To use the One-Touch Backup function with a memory card:
1. Locate the Card Reader slot (SD/MMC/MS) on your storage device.
2. Align the card with its connector end pointing to the corresponding slot and
its indentation facing up. Slide the card into the slot until it reaches the end.
3. Wait until the OTB (
Backup button to start backing up the contents of your memory card to a
newly created timestamp folder under /Backup/. During this process the
OTB ( ) indicator will blink blue to indicate read/write function.
) indicator glow blue, then press the One-Touch
137