Step 2. Connect To The Network - SMC Networks NAS02 User Manual

NOTE: If you have two hard disk drive installed, remove the hard disk drive on the left slot
first, then remove the hard disk drive on the right slot.

Step 2. Connect to the Network

1. Make sure that the computer is connected to a router.
2. Connect one end of the Ethernet cable to the network connector (LAN) on
the back of your storage system (NAS) and the other end to a router.
Or you can connect both your computer and storage system (NAS) to one
switch, and this switch is connected to the network which has a DHCP
server.
10