System Power-On Without Hard Disk Drive - SMC Networks NAS02 User Manual

System Power-on Without Hard Disk Drive

IMPORTANT: If you are using the hard disk drive that has been installed with NAS
middleware before, then follow the steps on this section. You can also Reset your System
to default by following this section. But be aware, that all data will be lost, as hard disks will
be formatted during this process!
15. When the discovery tool has discovered the SMCNAS02, it will show
"Zero-Disk Mode" on the Firmware Version column. Click "Configure
RAID Profile" on the Configuration URL column.
16. The following screen appears. Log in by root and no password is required.
32