SMC Networks NAS02 User Manual page 71

To change this . . .
Storage system name
Date, Time, Time zone
NTP server name or IP address Enter the name or IP address of the Network
Administrator name
Password
Confirm password
2. After making the necessary changes, click Apply.
3. When the confirmation message appears, click OK for the changes to take
effect.
Do this . . .
Enter the new name to use for the specific
storage system. The name can be up to 15
characters long and can include letters,
numbers, and hyphens.
In the Date fields, enter or select the month,
day, and year.
In the Time fields, enter or select the hour,
minute, and second.
In the Time zone list, select the time zone.
Time Protocol server from which the storage
system could adjust its time automatically. You
can use an NTP server name only if it is
resolvable/recognizable.
NOTE: The NTP server name's maximum
number of characters is 64. Can include only
letters (uppercase and lowercase A~Z),
numbers (0~9), hyphens (–), underlines (_), and
dots (.).
The IP address' maximum number of character
is 15 (including the three "."). The format is
xxx.xxx.xxx.xxx and the value of xxx is
between 0 and 255.
In the Administrator name field, enter the
administrator name for logging in to the
Storage System Management.
NOTE: Maximum number of characters is 15.
In the Password and Confirm password fields,
enter the password for logging in to the Storage
System Management. The administrator name
and password are case-sensitive.
NOTE: Maximum number of characters is 8.
Can include any printable ASCII characters but
not ( ' ).
63