SMC Networks NAS02 User Manual page 74

To change this . . .
Workgroup name
Get an IP address
automatically
Use this IP address
IP address
Subnet mask
Gateway IP address
DNS server settings
FTP server settings
If you select AD full domain you have to fill in the AD full domain name, AD
server's full domain controller name, AD administrator name, and the AD
administrator password.
66
o this . . .
Enter the new name for the specific workgroup.
NOTE: Maximum number of characters is 15.
Can include only letters (uppercase and
lowercase A~Z), numbers (0~9), hyphens (–)
and underlines (_). The first character must be a
letter (uppercase and lowercase A~Z).
If you have a DHCP server on your network,
the server can get its IP address from that
DHCP server automatically.
If you do not have a DHCP server, you must
specify an IP address, subnet mask, gateway IP
address, and DNS server.
NOTE: Maximum number of characters is 15
(including the three "."). The format is
xxx.xxx.xxx.xxx and the value of xxx is
between 0 and 255.
Allows your storage device to perform as an
FTP server, and it is highly recommended to
download the data transfer tool
from http://filezilla.sourceforge.
net/.