SOMFY KEYTIS 4 ALARME HOME IO Programming Manual

SOMFY KEYTIS 4 ALARME HOME IO
Programming with an already programmed remote:
1. Press on the already programmed remote the KEY button for 2 seconds. The programmed
remote beeps and the LED flashes.
2. On the new remote, press and release the KEY button. The new remote will beep and the
LED flashes.
3. Wait for the second confirmation beep of the new remote control.
4. On the already programmed remote, press the PROG button for 2 seconds. The programmed
remote beeps and the LED flashes.
5. Press and release the button on the programmed remote to be copied.
6. On the new remote control, press and release the PROG button. The new remote will beep
and the LED flashes.
7. Wait for the second confirmation beep of the new remote.
8. Press and release the same button on the new remote, such as the button to be copied on
the old model.
9. The new remote will beep and the LED flashes.
Your new remote control is now programmed.
Programming at the receiver:
1. Press on your receiver the PROG button. The LED on the receiver will light up.
2. On the new remote control, press and release the PROG button. The new transmitter will
beep and the LED flashes.
3. Wait for the second confirmation beep and the new remote until the LED flashes quickly.
http://www.remotecontrol-express.com
Programming Manual
- TEL : +44 (0) 207 399 7782 - FAX : +44 (0) 207 927 3151