Dell Latitude GM919 Quick Reference Manual page 29

3 If a problem is encountered during a test, a message appears with an error
code and a description of the problem. Write down the error code and
problem description and contact Dell (see "Contacting Dell" in your
User's Guide).
NOTE:
The Service Tag for your Tablet-PC is located at the top of each test
screen. If you contact Dell, technical support will ask for your Service Tag.
4 If you run a test from the Custom Test or Symptom Tree option, click the
applicable tab described in the following table for more information.
Tab
Results
Errors
Help
Configuration
Parameters
5 When the tests are complete, close the test screen to return to the Main
Menu screen. To exit the Dell Diagnostics and restart the Tablet-PC, close
the Main Menu screen.
6 Remove the Dell Drivers and Utilities media (if applicable).
Function
Displays the results of the test and any
error conditions encountered.
Displays error conditions encountered,
error codes, and the problem
description.
Describes the test and may indicate
requirements for running the test.
Displays your hardware configuration
for the selected device.
The Dell Diagnostics obtains
configuration information for all
devices from system setup, memory, and
various internal tests, and it displays
the information in the device list in
the left pane of the screen. The device
list may not display the names of all
the components installed on your
Tablet-PC or all devices attached to
your Tablet-PC.
Allows you to customize the test by
changing the test settings.
Quick Reference Guide
29