Foamit FRS-BP-15N Operation Manual

Battery powered foam rinse sanitize unit
Hide thumbs Also See for FRS-BP-15N:

Advertisement

Quick Links

Battery Powered Foam
Rinse Sanitize Unit
Operation Manual
FRS-BP-15N
READ ALL INSTRUCTIONS BEFORE USING OR
SERVICING THIS UNIT. KEEP THIS MANUAL IN A
LOCATION THAT IS READILY AVAILABLE TO USERS
AND SERVICE TECHNICIANS.
English (Original Instructions)
Scan this code for
operation manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FRS-BP-15N and is the answer not in the manual?

Questions and answers

Summary of Contents for Foamit FRS-BP-15N

  • Page 1 Battery Powered Foam Rinse Sanitize Unit Operation Manual FRS-BP-15N READ ALL INSTRUCTIONS BEFORE USING OR SERVICING THIS UNIT. KEEP THIS MANUAL IN A LOCATION THAT IS READILY AVAILABLE TO USERS AND SERVICE TECHNICIANS. Scan this code for English (Original Instructions)
  • Page 2 Store unit and battery indoors in a cool, dry location between 32°-77°F (0°-25°C) and < 75% relative humidity. Do not store below 32°F (0°C) or above 113°F (45°C). To prevent premature battery failure, do not store battery in depleted state for long periods of time. Model: FRS-BP-15N V20241127 • Page 2 of 9...
  • Page 3: State Of California Proposition 65 Warning

    PROTECT THE ENVIRONMENT Please dispose of packaging materials, old machine components, and hazardous fluids in an environmentally safe way according to local waste disposal regulations Model No.: FRS-BP-15N Manufactured by: FOAMit 3833 Soundtech Ct. SE Grand Rapids, MI 49512 US This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 4: Product Overview

    Santoprene diaphragm, Viton check seals Two 10 in. (25.4 cm) non-marking wheels, and two 5 in. (12.7 cm) casters, Wheel type one with lock *Flow rates given are based on chemical with viscosity of water. Model: FRS-BP-15N V20241127 • Page 4 of 9...
  • Page 5: Product Components

    Product Components Get to know the FRS-BP-15N components that you will need to use, adjust, or assemble. Back plate assembly • Inside view 1. Quick connect plug 8. Needle valve 2. Jug suction line 9. Check valve 3. In-line strainer 10.
  • Page 6: Tank Assembly

    15. 2.5 gallon sanitizer jug 22. Membrane switch 16. Drain plug 23. Needle valve 17. Hinged lid 24. Battery 18. Tank 25. Battery box 19. Triple click nozzle selector 26. Suction line valve 20. Trigger gun Model: FRS-BP-15N V20241127 • Page 6 of 9...
  • Page 7: Using Your Unit

    Note: Keep battery box lid closed and latched unless accessing battery. Do not operate unit with lid open or damaged. 6. Verify suction line valve at the base of the suction line is open, allowing fluid into the suction line. Model: FRS-BP-15N V20241127 • Page 7 of 9...
  • Page 8: After Use Instructions

    Ensure the tank still contains water. 14. Activate the unit until all chemical has been flushed from the system. 15. Turn off the unit and squeeze trigger handle to relieve any remaining pressure in the system. Model: FRS-BP-15N V20241127 • Page 8 of 9...
  • Page 9: Maintenance

    To service your unit, refer to the service manual which includes: • Troubleshooting procedures. • Detailed parts breakdowns and illustrations. • Part numbers of serviceable components and assemblies. Scan this code for service manual Model: FRS-BP-15N V20241127 • Page 9 of 9...

Table of Contents