Table of Contents

Advertisement

Quick Links

User Manual
v1.0 2025.01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FLIP and is the answer not in the manual?

Questions and answers

George
June 11, 2025

Not following just hovering

Subscribe to Our Youtube Channel

Summary of Contents for dji FLIP

  • Page 1 User Manual v1.0 2025.01...
  • Page 2 This document is copyrighted by DJI with all rights reserved. Unless otherwise authorized by DJI, you are not eligible to use or allow others to use the document or any part of the document by reproducing, transferring or selling the document. Only refer to this document and the content thereof as instructions to operate DJI products.
  • Page 3: Using This Manual

    Go to the address below or scan the QR code to watch the tutorial videos, which demonstrate how to use the product safely: https://www.dji.com/flip/video Download the DJI Fly App Make sure to use DJI Fly during flight. Scan the QR code to download the latest version. © 2025 DJI All Rights Reserved.
  • Page 4: Download Dji Assistant 2

    For increased safety, flight is restricted to a height of 98.4 ft (30 m) and a range of 164 ft (50 m) when not connected or logged into the app during flight. This applies to DJI Fly and all apps compatible with DJI aircraft.
  • Page 5: Table Of Contents

    DJI Flip User Manual Contents Using this Manual Legend Read Before Use Video Tutorials Download the DJI Fly App Download DJI Assistant 2 Product Profile Using for the First Time Preparing the Aircraft Preparing the Remote Controller DJI RC 2...
  • Page 6 DJI Flip User Manual Auto Takeoff Auto Landing Starting/Stopping the Motors Starting the Motors Stopping the Motors Stopping the Motors Mid-Flight Controlling the Aircraft Takeoff/Landing Procedures Intelligent Flight Modes FocusTrack MasterShots QuickShots Hyperlapse Cruise Control Recording Audio via App Video Suggestions and Tips...
  • Page 7 DJI Flip User Manual Gimbal Operation Modes Gimbal Angle Camera Notice Storing and Exporting Photos and Videos Storing Exporting 4.10 QuickTransfer Remote Controller DJI RC 2 Operations Powering On/Off Charging the Battery Controlling the Gimbal and Camera Flight Mode Switch...
  • Page 8 DJI Flip User Manual Post-Flight Checklist Maintenance Instructions Troubleshooting Procedures Risks and Warnings Disposal 6.10 C0 Certification Remote Controller Warnings EASA Notice Original Instructions 6.11 Aftersales Information © 2025 DJI All Rights Reserved.
  • Page 9: Product Profile

    Product Profile © 2025 DJI All Rights Reserved.
  • Page 10: Using For The First Time

    DJI Flip User Manual Product Profile 1.1 Using for the First Time Click the link or scan the QR code to watch the tutorial videos. https://www.dji.com/flip/video Preparing the Aircraft 1. Press both the left and right sides to remove the gimbal protector. Remove and throw away the disposable rubber cover.
  • Page 11 Manual Power-On/Power-Off: Press, then press and hold the power button to power on or off the aircraft. • The Unfold/Fold Arm for Auto on/off feature is enabled by default. You can disable the feature in DJI Fly when the aircraft is connected to a © 2025 DJI All Rights Reserved.
  • Page 12: Preparing The Remote Controller

    DJI Flip User Manual remote controller. Update the aircraft firmware and the DJI Fly app to the latest version. Otherwise, the feature may not be available. • If the aircraft is currently accessing the album, downloading materials, or updating firmware, folding both rear arms will not power off the aircraft.
  • Page 13: Dji Rc-N3

    The aircraft requires activation before first use. Press, then press and hold the power button to power on the aircraft and remote controller respectively, and then follow the onscreen prompts to activate the aircraft using DJI Fly. An internet connection is required for activation.
  • Page 14: Firmware Update

    DJI Flip User Manual Firmware Update A prompt will appear in DJI Fly when a firmware update is available. Update the firmware whenever prompted to ensure the optimal user experience. 1.2 Overview Aircraft 12 13 14 © 2025 DJI All Rights Reserved.
  • Page 15: Dji Rc 2 Remote Controller

    DJI Flip User Manual 15 16 17 1. Aircraft Status Indicator 9. Downward Infrared Sensing System 2. Forward Three-Dimensional Infrared 10. Speaker Sensing System 11. Battery Level LEDs 3. Mode Indicators 12. Battery Buckles 4. Gimbal Camera 13. Power Button 5.
  • Page 16: Dji Rc-N3 Remote Controller

    DJI Flip User Manual DJI RC-N3 Remote Controller 1. Power Button 8. Remote Controller Cable 2. Flight Mode Switch 9. Mobile Device Holder 3. Flight Pause/Return to Home (RTH) 10. Antennas Button 11. USB-C Port 4. Battery Level LEDs 12. Control Stick Storage Slots 5.
  • Page 17: Flight Safety

    Flight Safety © 2025 DJI All Rights Reserved.
  • Page 18: Flight Restrictions

    When using Palm Control and Mobile App Control, the max flight altitude is 30 m and the max flight distance is 50 m. These limits can not be changed in the DJI Fly app. The following information is suitable for when using the aircraft with the remote control devices.
  • Page 19 Prompt in DJI Fly App Altitude of the aircraft cannot ex- Max Altitude Max flight altitude reached. ceed the value set in DJI Fly. The straight-line distance from the aircraft to the Home Point Max Distance Max flight distance reached.
  • Page 20: Geo Zones

    Once the unlocking request is approved, you can synchronize the unlocking license through the DJI Fly app. To unlock the zone, alternatively, you can launch or fly the aircraft directly into the approved Authorization Zone and follow the prompts in DJI Fly to unlock the zone.
  • Page 21 DJI Flip User Manual prompt “Home Point is updated” before continuing flight. If the aircraft has taken off near buildings, the accuracy of the Home Point cannot be guaranteed. In this case, pay close attention to the current position of the aircraft during auto RTH. When the aircraft is close to the Home Point, it is recommended to cancel auto RTH and manually control the aircraft to land at an appropriate location.
  • Page 22: Operating The Aircraft Responsibly

    5. Make sure the gimbal and camera are functioning normally. 6. Make sure that there is nothing obstructing the motors and that they are functioning normally. 7. Make sure that DJI Fly is successfully connected to the aircraft. 8. Make sure all camera lenses and sensors are clean. ©...
  • Page 23 9. Only use genuine DJI parts or DJI-authorized parts. Unauthorized parts may cause system malfunctions and compromise flight safety. 10. Make sure the Obstacle Avoidance Action is set in DJI Fly, and the Max Altitude, Max Distance and Auto RTH Altitude are all set properly according to local laws and regulations.
  • Page 24: Flight Operation

    Flight Operation © 2025 DJI All Rights Reserved.
  • Page 25: Palm Control

    DO NOT touch DJI Flip mid-flight. Otherwise, DJI Flip may drift and a collision may occur. • DO NOT fly DJI Flip immediately after it has been in a collision or severely knocked or shaken. DJI Flip may not be able to perform stable flight. 3.1 Palm Control It is recommended to click the link below or scan the QR code to watch the tutorial video.
  • Page 26 Make sure to fly in an open and unobstructed environment without signal interference. • When using Palm Control, the max flight altitude of DJI Flip is 30 m and the max flight distance is 50 m. • Return to Home (RTH) is not supported in Palm Control. Maintain visual line of sight (VLOS) within a controlled area.
  • Page 27: Switching Modes

    DJI Flip User Manual If DJI Flip fails to perform palm takeoff or landing, follow the voice prompt of ◆ DJI Flip for troubleshooting or connect to the DJI Fly app for details. Voice prompt supports English or Mandarin according to the app language setting for the latest connection.
  • Page 28: Palm Takeoff/Landing And Smart Snaps

    1. Power on DJI Flip. Keep it still and wait for the system self-diagnostics to complete. 2. Make sure to leave enough room for maneuvering according to the preset parameters such as distance and height.
  • Page 29 In DirectionTrack mode, face DJI Flip and keep still. Wait for DJI Flip to fly forward before performing palm landing. In other modes, make sure that DJI Flip is hovering in place, move toward it, and then perform palm landing.
  • Page 30: Mobile App Control

    It is recommended to click the link below or scan the QR code to watch the tutorial video. https://www.dji.com/flip/video To use Mobile App Control, connect DJI Flip to the DJI Fly app on the smartphone via Wi-Fi and control DJI Flip in the app. In Mobile App Control, all the functions for Palm Control are available.
  • Page 31: Connecting Dji Flip

    DJI Flip User Manual • When using Mobile App Control, the max flight altitude of DJI Flip is 30 m and the max flight distance is 50 m. • Return to Home (RTH) is not supported in Mobile App Control. Maintain visual line of sight within a controlled area.
  • Page 32: Auto Landing

    DJI Flip User Manual Auto Landing 1. If conditions are safe to land, tap , then tap and hold to confirm. 2. Auto landing can be canceled by tapping 3. If the Downward Vision System is working normally, Landing Protection will be enabled.
  • Page 33: Stopping The Motors Mid-Flight

    • Stopping the motors mid-flight will cause the aircraft to crash. The default setting for Emergency Propeller Stop in the DJI Fly app is Emergency Only, which means that the motors can only be stopped mid-flight when the aircraft detects...
  • Page 34: Takeoff/Landing Procedures

    3. Power on the remote controller and the aircraft. 4. Launch DJI Fly and enter the camera view. 5. Wait for the aircraft self-diagnostics to complete. If DJI Fly does not show any irregular warning, you can start the motors.
  • Page 35: Focustrack

    (e.g., white walls). • Always be prepared to press the Flight Pause button on the remote controller or in DJI Fly in order to operate the aircraft manually in case any emergency situation occurs. © 2025 DJI All Rights Reserved.
  • Page 36: Mastershots

    DJI Flip User Manual • Be extra vigilant when using FocusTrack in any of the following situations: The tracked subject is not moving on a level plane. ◆ The tracked subject has large movements or changes pose. ◆ The tracked subject is out of sight for an extended period.
  • Page 37: Quickshots

    DJI Flip User Manual When the subject is in the air. ◆ When the subject is moving fast. ◆ The lighting is extremely dark (<15 lux) or bright (>10,000 lux). ◆ • DO NOT use MasterShots in places close to buildings or where the GNSS signal is weak.
  • Page 38: Hyperlapse

    DJI Flip User Manual When the subject is in the air. ◆ When the subject is moving fast. ◆ The lighting is extremely dark (<15 lux) or bright (>10,000 lux). ◆ • DO NOT use QuickShots in places close to buildings or where the GNSS signal is weak.
  • Page 39: Cruise Control

    DJI Mic 2, and Bluetooth earphones. For a list of compatible Bluetooth devices, please refer to the Downloads page on the DJI Flip official webpage. Audio recording compatibility issues may occur when using some Bluetooth earphones. Make sure to test them before recording.
  • Page 40: Video Suggestions And Tips

    DJI Flip User Manual 3.4 Video Suggestions and Tips 1. Select the desired gimbal operation mode in DJI Fly. 2. It is recommended to take photos or record videos when flying in Normal or Cine mode. 3. DO NOT fly in bad weather such as on rainy or windy days.
  • Page 41 Aircraft © 2025 DJI All Rights Reserved.
  • Page 42: Aircraft

    DJI Flip User Manual Aircraft 4.1 Flight Mode The aircraft supports the following flight modes, which can be switched via the Flight Mode switch on the remote controller. Normal Mode: Normal mode is suitable for most flight scenarios. The aircraft can hover precisely, fly stably, and use Intelligent Flight Modes.
  • Page 43: Aircraft Status Indicators

    DJI Flip User Manual 4.2 Aircraft Status Indicators Aircraft Status Indicators Descriptions Normal States Blinks red, yellow, and Powering on and performing self-diagnostic green alternately tests Blinks green slowly GNSS enabled Blinks green twice repeat- Vision systems enabled × 2...
  • Page 44: Notice

    Point. When the aircraft reaches the area above the Home Point, the gimbal camera will automatically flip downwards. The AR aircraft shadow will appear in the camera view when the aircraft is approaching the ground, enabling you to control the aircraft to land more accurately in your preferred location.
  • Page 45: Trigger Method

    DJI Flip User Manual • It is important to set a suitable RTH altitude before each flight. Launch DJI Fly and set the RTH altitude. • The aircraft cannot sense obstacles during RTH if the environment conditions are not suitable for the sensing system.
  • Page 46: Rth Procedure

    During flight, if the battery level is low and only sufficient to fly to the Home Point, a warning prompt will appear in DJI Fly. If you tap to confirm RTH or do not take action before the countdown ends, the aircraft will automatically initiate low battery RTH.
  • Page 47: Auto Landing

    If the ground is determined suitable for landing, DJI Flip will land directly. • If the ground is determined unsuitable for landing, DJI Flip will hover and wait for pilot confirmation. You can perform palm landing or land DJI Flip manually.
  • Page 48: Sensing System

    • In the following situations, Landing Protection may be triggered by mistake and DJI Flip is unable to land. You can perform palm landing or land DJI Flip manually. Flying over surfaces that the vision system may confuse for water, such as ◆...
  • Page 49: Notice

    The forward 3D infrared sensing system can sense the obstacles in the front. It will activate automatically when the aircraft is in Normal or Cine mode and Obstacle Avoidance Action is set to Brake in DJI Fly. The positioning function of the downward vision system is applicable when GNSS signals are unavailable or weak.
  • Page 50: Propellers

    DO NOT use the aircraft in dusty or humid environments. • The vision system cameras may need to be calibrated after being stored for an extended period. A prompt will appear in DJI Fly and calibration will be performed automatically. •...
  • Page 51: Notice

    Use two propellers from the same package. DO NOT mix with propellers from other packages. • Only use official DJI propellers. DO NOT mix propeller types. • Propellers are consumable components. Purchase additional propellers if necessary.
  • Page 52: Replacing The Propellers

    It is recommended to click the link below or scan the QR code to watch the tutorial video. https://www.dji.com/flip/video Make sure DJI Flip is powered off. 1. Remove the old propellers and screws using the screwdriver from the aircraft package.
  • Page 53 DJI Flip User Manual 3. When installing, hold the end of the propeller with one hand, ensuring the DJI logo is facing up. Gently lift the propeller guard and insert the propeller through the gap from below. Meanwhile, use the screwdriver with the other hand to assist in aligning the screw hole of the propeller with the protrusion on the motor.
  • Page 54: Intelligent Flight Battery

    DJI Flip User Manual 4.7 Intelligent Flight Battery Notice • Read and strictly follow the instructions in this manual, in the Safety Guidelines and on the battery stickers before using the battery. You shall take full responsibility for all operations and usage.
  • Page 55: Installing/Removing The Battery

    DJI Flip User Manual Installing/Removing the Battery Installation Removal • DO NOT insert or remove the battery while the aircraft is powered on. • Make sure the battery is mounted securely with a clicking sound. DO NOT launch the aircraft when the battery is not securely mounted, as this may cause poor contact between the battery and the aircraft and present hazards.
  • Page 56 DJI Flip User Manual 1. Power Button 2. Battery Level LEDs The battery level LEDs display the power level of the battery during charging and discharging. The statuses of the LEDs are defined below: LED is on LED is flashing...
  • Page 57: Charging The Battery

    DJI Flip User Manual Charging the Battery Fully charge the battery before each use. It is recommended to use the charging devices provided by DJI or other chargers that support the USB PD fast charging protocol. Using a Charger •...
  • Page 58 DJI Flip User Manual https://www.dji.com/flip/video • The environmental temperature affects the charging speed. Charging is faster in a well-ventilated environment at 25° C (77° F). • The charging hub is only compatible with specific model of the Intelligent Flight Battery. DO NOT use the charging hub with other battery models.
  • Page 59 DJI Flip User Manual How to Charge Installation 100% When using chargers with different power ratings to charge multiple batteries, the charging sequence will vary. Refer to the table below for details. Charger Power <65 W Charges in sequence from highest to lowest battery level.
  • Page 60 DJI Flip User Manual Using Charging Hub as a Power Bank 1. Insert one or more batteries into the charging hub. Connect an external device, such as a smartphone or remote controller to the USB-C port of the charging hub, and then press and hold the function button for three seconds.
  • Page 61 DJI Flip User Manual • Power accumulation stops automatically in the following situations: The receiving battery is fully charged, or the power of the output battery is ◆ lower than 10%. A charger or external device is connected to the charging hub or any battery ◆...
  • Page 62: Battery Protection Mechanisms

    DJI Flip User Manual Battery Protection Mechanisms The battery level LEDs can display battery protection notifications triggered by abnormal charging conditions. LEDs Blinking Pattern Status LED2 blinks twice per second Overcurrent detected LED2 blinks three times per second Short circuit detected...
  • Page 63: Gimbal Operation Modes

    Use the gimbal dial on the remote controller to control the tilt of the gimbal. Alternatively, do so through the camera view in DJI Fly. Press and hold the screen until the gimbal adjustment bar appears. Drag the bar to control the gimbal’s angle.
  • Page 64: Storing And Exporting Photos And Videos

    DJI Flip User Manual • The cameras may not focus correctly in the following situations: Capturing photos and videos of dark objects far away. ◆ Capturing photos and videos of objects with repeating identical patterns and ◆ textures or objects without clear patterns or textures.
  • Page 65: Quicktransfer

    In Mobile App Control, after the smartphone is connected to DJI Flip, enter QuickTransfer mode by going to the Album view. When DJI Flip is not connected to the smartphone, you can tap the QuickTransfer or Wi-Fi Devices card on the home screen in DJI Fly to enter QuickTransfer mode. You can also...
  • Page 66: Remote Controller

    Remote Controller © 2025 DJI All Rights Reserved.
  • Page 67: Dji Rc

    DJI Flip User Manual Remote Controller 5.1 DJI RC 2 Operations Powering On/Off Press the power button once to check the current battery level. Press, then press and hold to power the remote controller on or off. Charging the Battery Connect the charger to the USB-C port on the remote controller.
  • Page 68: Controlling The Gimbal And Camera

    DJI Flip User Manual Controlling the Gimbal and Camera 1. Gimbal Dial: Control the tilt of the gimbal. 2. Record Button: Press once to start or stop recording. 3. Camera Control Dial: Use to adjust the zoom by default. The dial function can be set to adjust the focal length, EV, shutter speed, and ISO.
  • Page 69: Customizable Buttons

    DJI Flip User Manual Customizable Buttons To view and set the button function, go to camera view in DJI Fly, and tap > Control > Button Customization. Remote Controller LEDs 1. Status LED 2. Battery Level LEDs Status LED Blinking Pattern...
  • Page 70: Battery Level Leds

    The remote controller beeps to indicate an error or warning. Pay attention when prompts appear on the touchscreen or in DJI Fly. Slide down from the top of the screen and select Mute to disable all alerts, or slide the volume bar to 0 to disable some alerts.
  • Page 71: Linking The Remote Controller

    DJI Flip User Manual • A prompt will be displayed in DJI Fly if the transmission signal is weak during flight. Adjust the remote controller orientation according to the attitude indicator display to make sure that the aircraft is in the optimal transmission range.
  • Page 72 Open Quick Settings: Slide down twice the top of the screen to open the sta- from the top of the screen to open tus bar when in DJI Fly. Quick Settings when in DJI Fly. The status bar displays the time, Wi-Fi signal, battery level of the remote con- troller, etc.
  • Page 73: Dji Rc-N3

    DJI Flip User Manual 5.2 DJI RC-N3 Operations Powering On/Off Press the power button once to check the current battery level. Press, then press and hold to power the remote controller on or off. Charging the Battery Connect the charger to the USB-C port on the remote controller.
  • Page 74: Flight Mode Switch

    Home Point. Press the button again to cancel RTH and regain control of the aircraft. Customizable Button To view and set the button function, go to camera view in DJI Fly, and tap > Control > Button Customization.
  • Page 75: Remote Controller Alert

    There will be an alert if the remote controller is not used for a period while it is powered on but is not connected to the aircraft or the DJI Fly app on the mobile device. The remote controller will automatically power off after the alert stops. Move the control sticks or press any button to cancel the alert.
  • Page 76: Linking The Remote Controller

    Otherwise, the remote controller will experience interference. • A prompt will be displayed in DJI Fly if the transmission signal is weak during flight. Adjust the remote controller orientation according to the attitude indicator display to make sure that the aircraft is in the optimal transmission range.
  • Page 77 Appendix © 2025 DJI All Rights Reserved.
  • Page 78: Appendix

    Using DJI Fly When connecting the aircraft or remote controller to DJI Fly, you will be notified if a new firmware update is available. To start updating, connect your remote controller or mobile device to the internet and follow the on-screen instructions. Note that you cannot update the firmware if the remote controller is not linked to the aircraft.
  • Page 79: Flight Recorder

    6.4 Flight Recorder Flight data including flight telemetry, aircraft status information, and other parameters are automatically saved to the internal data recorder of the aircraft. The data can be accessed using DJI Assistant 2 (Consumer Drones Series). 6.5 Post-Flight Checklist •...
  • Page 80: Troubleshooting Procedures

    Check if the Intelligent Flight battery and the remote controller are activated by charging. If the problems persist, contact DJI Support. 3. Power-on and start-up problems Check if the battery has power. If yes, contact DJI Support if it cannot be started normally. 4. Firmware update issues Follow the instructions in the user manual to update the firmware.
  • Page 81: Risks And Warnings

    7. How to detect careless handling or storage in unsafe conditions Contact DJI Support. 6.8 Risks and Warnings When the aircraft detects a risk after powering on, there will be a warning prompt on DJI Fly. Pay attention to the list of situations below. •...
  • Page 82: C0 Certification

    Maximum Propeller Speed 20500 RPM MTOM Statement The MTOM of DJI Flip (Model DF1A0424) is 249 g to comply with C0 requirements. You must follow the instructions below to comply with the MTOM requirements. • DO NOT add any payload to the aircraft except the items listed in the List of Items including qualified accessories section.
  • Page 83: Remote Controller Warnings

    Original Instructions This manual is provided by SZ DJI Technology, Inc., and the content is subject to change. Address: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China, 518055.
  • Page 84: Aftersales Information

    DJI Flip User Manual 6.11 Aftersales Information Visit https://www.dji.com/support to learn more about aftersales service policies, repair services, and support. © 2025 DJI All Rights Reserved.
  • Page 85 This content is subject to change without notice. Download the latest version from https://www.dji.com/flip/downloads If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. DJI is a trademark of DJI. Copyright © 2025 DJI All Rights Reserved.

Table of Contents

Save PDF