System Settings - VDO MS 4100 User Manual

System settings

To customise the navigation functions to your own
needs, you can change several settings.
In the main menu, select "
:
The "
The following information screens are available:
Route selection
Select the preferred criterion:
Fastest C: Fastest route preferred
–
Shortest V: Shortest route preferred
–
Main roads N: Motorways are preferred for route planning
–
No main roads M: Avoid motorways for route planning
–
The symbol for the selected road type is displayed on information screen i3 (System
info).
In addition, you can bypass toll roads when planning your route:
Activate option "
:
A check mark appears in front of the option.
If no toll-free roads are available, toll roads will be included for planning the route.
Note: If this option is activated, route planning may take longer than the time needed
with this function deactivated. Therefore this option should only be activated if needed.
Speed
In the " " menu, you can configure the following settings:
Speed correction
Place the cursor on the value after "
Press the PUSH – TURN button.
Set the desired speed correction.
Press the PUSH – TURN button again in order to store this setting.
Speed limit
Position the cursor on the value after "
Press the PUSH – TURN button.
Set the desired speed.
Press the PUSH – TURN button again in order to store this setting.
".
" menu is displayed.
," if you wish to avoid toll roads as much as possible.
".
".
NAVIGATION
61