Also See for SPORTAGE 2009:

Advertisement

Kia SPORTAGE 2009 Manual

Controls and functions

This Quick Reference Guide does not replace your System Owner's Manual. If you require additional information or are unsure of a specific issue, refer to the System Owner's Manual for additional information.

Control panel

Controls and functions - Control panel

  1. Power / Volume control
    • Push knob (over 0.8 second): Turns the power off.
    • Push knob (under 0.8 second): Each time the knob is pressed, the Audio is turned on and off.
    • Turn knob: The range of volume adjustment is between 0 ~ 35.
  2. FM/AM
    Each press will change the bands in the following order: FM1 → FM2 → AM → FM1
  3. SAT
    Each press will change the bands in the following order: SIRIUS1 → SIRIUS2 → SIRIUS3 → SIRIUS1
  4. MEDIA
    Each press will change the bands in the following order: DISC(CD, MP3) → (USB or iPod) → (AUX) → (Phone Music) → DISC(CD, MP3)
  5. SEEK/TRACK Up/Down
    • SHORT KEY(less than 0.8 second)
      • FM/AM Mode: Automatically searches for the previous or next broadcast frequency and starts playing.
      • SAT Mode: Receives the previous or next channel.
      • CD Mode: Plays the previous or next track.
      • MP3, USB Mode: Plays the previous or next file.
      • iPod Mode: Plays the previous or next song.
    • LONG KEY(over 0.8 second)
      • FM/AM Mode: Quickly moves through the frequencies while the button is pressed. Once released, automatically searches for broadcasts which can be received.
      • SAT Mode: Quickly moves to the previous or next channel.
      • CD Mode: REW/FF the current playing track.
      • MP3, USB Mode: REW/FF the current playing file.
      • iPod Mode: REW/FF the current playing song.
  6. TUNE
    • FM/AM Mode: Turn the knob to search for the desired frequency. Press the knob to receive the selected frequency.
    • SAT Mode: Turn the knob to search for the desired channel. Press the knob to receive the selected channel.
    • CD Mode: Turn the knob to search for the desired track. Press the knob to play the selected track.
    • MP3, USB Mode: Turn the knob to search for the desired file. Press the knob to play the selected file.
    • iPod Mode: Turn the knob to search for the desired song. Press the knob to play the selected song.
  1. MAP VOICE
    Displays the map screen for the current position.
  2. DEST
    Displays the Destination menu screen.
  3. ROUTE
    Displays the Route menu screen.
  4. SETUP
    Displays the Setup menu screen.
  5. PHONE
    Displays the Bluetooth® handsfree screen.
  6. DISC
    Eject Eject the inserted disc.
  7. CLOCK
    • Short Key (under 0.8 second)
      • When the screen is turned on: displays the current time in the center of the screen.
      • When the screen is turned off: turns the full clock screen on and off.
    • Long Key (over 0.8 second)
      • Displays the clock setting screen.
  8. RESET
    Resets the system - if software locks-up.
  9. DISC insert indicator LED
    Displays that a DISC has been inserted.


If pressing the knob for over 0.8 second and the system does not shut down, carefully use a straightened paper clip at the access hole shown next to the right DISC indicator LED to reset the software. The system power will shut-off and restart.


Always give your full attention to driving. Avoid operating your system in such a way that you can be distracted driving vehicle operation.

Steering wheel remote controller

Steering wheel remote controller

  1. Volume Up/Down
    Increases or decreases the speaker volume within a range between 0 ~ 35.
  2. MUTE
    Turns the sound on and off. When the MUTE is turned on, the MUTE icon will become displayed. When in the Navigation screen, the MUTE icon at the top of the screen will disappear after 3seconds.
  3. CALL
    Press this key to receive an incoming call. If pressed while in AUDIO/Navigation mode, the Bluetooth® handsfree screen will be displayed.
  4. END
    Press this key to reject an incoming call.
    If press while on a call, then the call will be ended.
  5. Voice Recognition
    Starts Voice Recognition.
  6. Mode
    Each time the Mode button is pressed, the mode will converted in the following order: FM1 → FM2 → AM → SIRIUS1 → SIRIUS2 → SIRIUS3 → (DISC) → (USB or iPod) → (AUX) → (Phone Music) → FM1.
    If a not supported DISC has been inserted or if the corresponding unit has not been connected, the mode will not be recognized and automatically switch to the next mode.
    • Press this button for over 0.8 second to turn the Audio ON and OFF.
    • Press this button when the Power is turned off to turn the power on.
  7. Seek Up/ Down
    • SHORT KEY(less than 0.8 second)
      • FM/AM: Receives the previous or next preset frequency.
      • SIRIUS Mode: Receives the previous or next preset channel.
      • CD Mode: Plays the previous or next track.
      • MP3, USB Mode: Plays the previous or next file.
      • iPod Mode: Plays the previous or next song.
    • LONG KEY(Over 0.8 second)
      • FM/AM Mode: Quickly moves through the frequencies while the button is pressed. Once released, it automatically searches for broadcasts which can be received.
      • SIRIUS Mode: Quickly moves to the previous or next channel.
      • CD Mode: REW/FF the current playing track.
      • MP3, USB Mode: REW/FF the current playing file.
      • iPod Mode: REW/FF the current playing song.

Audio sound setting

Displays the Display setup screen
Audio sound setting - Step 1
Press button on the main screen of each Audio mode (FM/AM, SIRIUS, CD, MP3, USB, iPod and AUX) to display the Audio sound setup screen.

Audio sound setting - Step 2

FAD/BAL
The position of the sound can be adjusted by using the up-down and left-right ( ) buttons on the left side of the screen.
Press the button to position the sound in the center of the vehicle.

BASS/MID/TREB
The BASS/MID/TREB can be adjusted by using the left/right () buttons of each control.

Audio sound setting - Step 3

Auto volume control ON/ OFF
Each time the button is pressed, the Auto volume control function is turned on and off.

Touch screen beep ON/OFF
Each time the button is pressed, the beeping sound that follows each press on the screen will turn on and off.

Display setting

Displays the Display setup screen
Display setting - Step 1

Press the button on the control panel to display the Setup menu screen.
Press button to display the Display Setup screen.

Display setting - Step 2

Display mode
Press the button for the desired display mode from , , and modes. The current selected mode is highlighted.

Brightness
Use the left/right buttons () for each control to make adjustments.

Display OFF
Press the button.

Display ON
Press anywhere on the black screen.
The screen will be displayed prior to display setting.

Operating the FM/AM radio

Listening to the FM/AM radio
Operating the FM/AM radio - Step 1

  1. Press the button on the control panel. The FM/AM radio band of the most recent station selected will be displayed.
  2. Press the FM/AM button to change the desired radio band. Each press will change the bands in the following order: FM1 → FM2 → AM → FM1
  3. Select the desired broadcast frequency.

Selecting FM/AM broadcast frequency

Selecting a frequency through presets
Operating the FM/AM radio - Step 2
Press the preset button of the desired broadcast frequency.

Selecting a Broadcast frequency through SEEK
Operating the FM/AM radio - Step 3
Press the or button on the control panel or the or button on FM1, FM2, and AM mode screens for less than 0.8 second. Once the SEEK function is operating (SEEK indicator blinking), the next or previous broadcast frequency with superior reception will be searched automatically.

Selecting a broadcast frequency through manual search
Operating the FM/AM radio - Step 4
Press the , buttons or turn the knob on the control panel in clockwise or counter-clockwise direction. Each click on the tune knob or the or button will increase or decrease the frequency by 1 step (FM: 0.2 MHz, AM: 10 kHz).

Operating the FM/AM radio - Step 5

Storing FM/AM preset

  1. Select the desired frequency.
  2. Press the preset button for over 0.8 second. The frequency will become stored along with a beep sound.

Scanning FM/AM broadcast frequency

  1. Press the button.
    • SCAN (less than 0.8 second): Scans all frequencies and plays only frequencies with superior reception for 5 seconds each.
    • PRESET SCAN (over 0.8 second): Scans the 6 frequencies stored as preset frequencies in the current band for 5 seconds each.
  2. Press the button again to continue listening to a frequency. The scan will be terminated and the current frequency will continue to be played.

Operating the SIRIUS radio

Listening to the SIRIUS radio
Operating the SIRIUS radio - Step 1

  1. Press the button on the control panel. The SIRIUS radio band screen of the most recent station selected will be displayed.
  2. Press the button to change the desired radio band. Each press will change the bands in the following order: SIRIUS1 → SIRIUS2 → SIRIUS3 → SIRIUS1
  3. Select the desired broadcast channel.

Operating the SIRIUS radio - Step 2

Switching the SIRIUS modes (channel/category)
Each time the button is pressed, the mode will switch between channel mode and category mode.
Category mode will begin operating when the orange light is turned ON.

Selecting SIRIUS broadcast channel
Selecting a channel through presets
Press the preset button of the desired channel.

Selecting with Channel Up/ Down
Operating the SIRIUS radio - Step 3
Press the or button on the control panel or the or button on SIRIUS1, SIRIUS2, and SIRIUS3 mode screens for less than 0.8 second. The previous or next channel will be selected.

Selecting a channel through manual search
Operating the SIRIUS radio - Step 4

  1. Turn the knob on the control panel in clockwise or counterclockwise direction. Each click on the knob will display the channel information of the previous or next channel. The current playing channel will continue to play.
  2. Press the knob at the desired channel. The selected channel will begin playing.

Selecting channel through channel/category list
Operating the SIRIUS radio - Step 5

  1. Press the button.
    • If in channel mode, the Channel list screen will be displayed.
    • If in category mode, the Category list screen will be displayed. Select the desired category button to display the channel list screen for the corresponding category.
      • Within the Channel List screen, if the button next to each channel name is pressed, the selected channel will be excluded from SCAN operation.
        Operating the SIRIUS radio - Step 6
      • Channel 0 is the radio ID and contains information required for SIRIUS activation.
  2. Select the desired channel button. The previous screen will be restored and the selected channel will begin playing.

Selecting channel by directly inputting the channel number
Operating the SIRIUS radio - Step 7

  1. Press the button. The Channel search screen will be displayed.
    Operating the SIRIUS radio - Step 8
  1. Input desired channel number, and press the button.
    The previous screen will be restored and the selected channel will begin playing.

Operating the SIRIUS radio - Step 9

Storing SIRIUS presets

  1. Select the desired channel.
  2. Press the preset button for over 0.8 second. The frequency will be saved along with beep sound.

Scanning SIRIUS broadcast channel

  1. Press the button.
    • SCAN (under 0.8 second): Scans all channels for 5 seconds each if in channel mode. If in category mode, scans all channels within the current category for 5 seconds each.
    • PRESET SCAN (over 0.8 second): Scans the 6 preset channels within the current band for 5 seconds each.
  2. Press the button again to continue playing the channel. The scan selection will be terminated and the current channel will continue to play.

Operating the CD

Operating the CD - Step 1

Listening to CD music

  1. Insert the CD or press the button on the Control panel if the CD is already inserted.
  2. Select the desired track.

Selecting the CD track
Selecting through Track Up / Down

Press the or button on the control panel or the or button on the steering wheel remote controller or or buttons on the screen for less than 0.8 second. The next or previous track will begin playing.

Selecting track through search
Operating the CD - Step 2

  1. Turn the knob on the control panel in clockwise or counter-clockwise direction. Each click on the knob will display the information of the next or previous track. The current playing track will continue to play.
  2. Press the knob at the desired track. The searched track will begin playing.

Operating the CD - Step 3

REW/FF CD track
Press and hold the or button on the control panel or the or button on the steering wheel remote controller or the or button for over 0.8 second.

Setting Random function for CD music
Press the button. Each press will change the function in the following order: RANDOM → RANDOM OFF → RANDOM
* RANDOM: plays all tracks in the disc in random order.

Operating the CD - Step 4

Setting Repeat function for CD music
Press the button. Each press will change the function in the following order: REPEAT →REPEAT OFF → REPEAT
* REPEAT: repeats the current playing track.

Scanning CD track

  1. Press the button. Each press will change the function in the following order: SCAN → SCAN OFF → SCAN.
    * SCAN: Scans all tracks in the disc for 9 seconds each.
  2. Press the button again to continue listening to the track. The scan selection will be terminated and the current track will continue to play.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Kia SPORTAGE 2009 Manual

Advertisement

Need help?

Need help?

Do you have a question about the SPORTAGE 2009 and is the answer not in the manual?

Questions and answers

Table of Contents