HyperX Cloud Stinger 2 Wireless Manual

Overview

1. Swivel to mute microphone
2. Status LED
3. Power button
4. USB-C charge port
5. Volume wheel
6. USB wireless adapter
7. Wireless pairing pin hole
8. Wireless status LED
9. USB-C charge cable

Using the Headset

1. Connect the wireless adapter to your device
2. Power on the headset

Setting up with PC

Right click speaker icon > Select Open Sound settings > Select Sound control panel

Playback Device
Set Default Device to "HyperX Cloud Stinger 2 Wireless"

Recording Device
Set Default Device to "HyperX Cloud Stinger 2 Wireless"

Setting up with PlayStation 5

Go to the home screen and select Settings > Sound Microphone

• Input Device: USB Headset "HyperX Cloud Stinger 2 Wireless" Audio Output
• Output Device: USB Headset "HyperX Cloud Stinger 2 Wireless"
• Output to Headphones: All Audio

Power button

Power on/off - Hold button for 3 seconds to power headset on/off

Status LED

*Battery level indication
*The status LED will automatically turn off to conserve battery life

Volume wheel

Scroll up and down to adjust volume level.

Swivel to Mute Microphone

Charging

It is recommended to fully charge your headset before first use.

HyperX NGENUITY Software

Go to hyperxgaming.com/ngenuity to download the NGENUITY software. NGENUITY software features include:

• DTS Headphone: X
• Adjustable EQ settings
• Battery level indicator

Questions or Setup Issues?
Contact the HyperX support team at hyperxgaming.com/support/headsets

Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.