MOZA R5 Manual

• Intelligent Temperature Control System
• 15-bit Resolution
• MOZA Pit House Control Center Software
• MOZA App Cloud Control

Precautions

• Never expose the unit to rain or water to avoid fire / electric shock.
• Do not expose the unit to direct sunlight for extended periods as this may damage the unit.
• Excessive use may cause health risks to users, for the average user it is recommended to use no more than 2 hours a day.
• The R5 is not suitable for children under the age of 6, and smaller parts may present a choking hazard.
• Children under the age of 13 should be accompanied by a guardian when using the R5.
• It is forbidden to disassemble the device without the permission of MOZA, otherwise the user voluntarily voids their warranty.
• The R5 must be connected to a safe electronic power supply.

• If repair or replacement is required, on y conduct this with MOZA directly or relevant authorized repair centers.
• Non-standard power supplies are prohibited from use.
• Use only AC power provided by a standard wall outlet to avoid damage to the R5.
• Do not expose the device to heat sources as this will damage the R5.
• If the R5will not be used for an extended period, unplug the device.
• If you find an abnormality with the R5, please stop using the device immediately and contact MOZA directly or a relevant authorized dealer / center.
• Please follow the MOZA official website or relevant social media for the latest information on the R5 or related products.
  This product is designed as a simulator! Please remember to distinguish simula tions from reality and drive safely!

Software Introduction
MOZA Pit House is MOZA's one stop software solution for the MOZA ecosystem. Here, users can check the status of all their connected MOZA devices. This also allows for vast configurations, including setting the base angle of the wheel, force feedback, pedal adjustments, HUD settings, game settings and more. It also allows for quick starting of relevant games if they have been detected on the computer.

The included presets allow for beginners to quickly select a comfortable setting and get started in the world of racing, whereas more professional players have access to detailed and advanced configurations of their MOZA products should they wish to adjust.

One of our latest additions is the FFB Effect Equalizer, which allows for adjustments to give the best feeling of the road through the steering wheel as well as other surfaces (such as grass, or dirt).

Our one-click update system allows for a fast and seamless upgrade of the entire MOZA ecosystem, allowing users to quickly get into the action.

Product Parameters
Supported Platform: PC
Drive Form: Direct Drive
Maximum Turning Angle: Unlimited
Base Material: Aviation-grade Aluminum Alloy
Base Color: Black
Maximum Torque Output: 5.5 Nm
Input Voltage: 110V-220V AC ->12V DC
Resolution: 15-bit
USB Refresh Rate: 1000Hz
App Functionality: Supported
Quick Release System: Supported
Interface: Base, Power Port, Data Port, Display Support, Pedal Interface
Accessories: Product Manual and Warranty Card, Power Supply, Data Cable, Toolkit
Installation Method: 4 screws on bottom of base
Desktop Mount: Included
Online Firmware Upgrade Function: Supported

ES Steering Wheel

Product Description

• High-grade Leather and Stitching
• Aluminum Alloy Frame
• MOZA Racing Custom Quick Release
• Aluminum Alloy Shifter Paddles
• 22 Configurable Keys
• MOZA Flow Shift Color Indicator Lighting

Quick Release Instructions

1. Align the 6 steel balls on the steering wheel with the 6 grooves on the wheelbase.
2. Press the wheel into the wheelbase, keeping the balls aligned with each other.
3. The quick release will automatically snap into place, locking the wheel to the base. If the quick release does not lock, try rotating the panel on the base to its default position, and try again until it locks correctly.
4. To remove the wheel from the base, simply use two hands to pull back on the outer ring (black color) and pull the wheel out at the same time.

Wheel Configuration
Using MOZA Pit House, our software suite, the ES steering wheel can easily be set up and configured to your liking.

• Joystick Mode: Can be configured as buttons or keys.
• Indicator Light Switch: Allows for switching the indicator light off, on, or specific speed settings.
• Indicator Light Display Mode: Divided into two modes, toggled in the MOZA Pit house suite.
• Speed Adjustment: Adjustable according to speed and the timing of the shift indicator light, with different presets available.
• Brightness Adjustment: Allows for adjusting of the brightness of the shift indicator.

Product Parameters
Wheel Material: Microfiber Leather
Frame Material: Aluminum Alloy
Shifter Material: Aluminum A1 oy
Size: 11 Inches
Buttons: 22 (Configurable)
LED Count (Strip): 10 LEDs
Smart Telemetry: Supported
MOZA Pit House Light Configuration: Supported
Quick Release: Supported

SR-P Lite Racing Pedals

Product Description

• High-strength Steel Pedals
• High Precision Hall Sensor
• Compatible with a variety of setups
• Adjustable Pedal Spacing
• Detachable Pedals
• Pedal Input Adjustable (Software)

Pedal Installation Process

1. Install the pedals onto the included footrest using the mounting holes. Use a 2.5mm hexagon wrench to fix the M4*10 screws into the footrest. To ensure stability and that the pedals will remain secure, it is recommended to use all four screws and install firmly.
2. Connect the pedal wires to the corresponding included interface, using the wire clip under the pedal base to clamp the wires, preventing them from coming loose or interfering with product use.
   

3. Open the MOZA Pit House software suite to preview and confirm the status of each pedal. If the device is still colored gray or does not respond after using the pedal, please unplug the base, close the MOZA Pit House, restart your PC and reconnect the base, finally opening the MOZA Pit House again.
4. The pedal input (start, end point, stroke detail) can all be adjusted within the MOZA Pit House suite.
   

Pedal Spacing Adjustment
Select the relevant screw holes of the pedal you wish to adjust, loosen the pedal, and move it either left of right to align the pedal as you wish, tightening the screws to lock the pedal into place (adjusting the distance between the throttle, brake and clutch is the same).

Plate Height Adjustment
Using a 2.5mm hexagon wrench, adjust the screws on the pedal board counterclockwise, then use a 7 mm open-end wrench to remove the back nut and board screw. You may then move the board up and down to adjust the height according to your needs, then screwing the back nut and board screw back into place. Adjustments to the throttle, brake and clutch are done in the same way.

Product Parameters
Pedal Material: High-strength Steel
Panel Material: High-strength Steel
Color: Black
Throttle Sensor: Hall Sensor
Pedal Spacing: Adjustable
Pedal Height: Adjustable
Pedal Input Adjustment: Software Supported
Pedal Reversable Function: Supported
Pedal Output Curve Adjustment: Software Supported
Anti-slip Pedal Bottom: Included

Packing List

• R5 Direct Drive Wheelbase
• ESRacing Steering Wheel
• SR-P Lite Racing Pedals
• 15 Degree Desktop Mount