Moza TSW Manual

Installation

Method A:

• Align the six ball bearings on the wheel quick release with the six notches on the base quick release mount.
• Press the quick release onto the base mount, keeping the bearings and notches aligned.
• The quick release will automatically lock into place. If it doesn't, then remove it, recheck the alignment and try again.
• To remove the wheel, squeeze the black quick release part with the MOZA logo towards the wheel with both hands and pull out the wheel at the same time.

Method B:

• Rotate the wheelbase until you locate the arrow directly above the base.
• Centre the wheel and attach it to the wheelbase.
• To remove the wheel, use both hands to squeeze the black quick release part with the MOZA logo towards the wheel with both hands and pull out the wheel at the same time.

Steering Wheel Configuration

You can set up the TSW Steering Wheel quickly and easily in the MOZA Pit House software.

• Joystick mode: Push buttons or D-pad.
• RPM indicator switch modes: Choice of three modes – RPM, off and constant.
• Indicator modes: There are two modes, Mode 1 and Mode 2, both are explained in detail when the mouse is hovered over the corresponding option.
• RPM indicator timing: Choose between early, normal, late or custom to fully match in-game RPM timing.
• RPM modes: It supports two modes – percentage and rev speed. In percentage mode, the shift indicator light activates when the RPM reaches a specified percentage of the maximum RPM setting. In rev speed mode, the shift indicator light activates when the RPM reaches a predetermined absolute value.
• Brightness: Adjust the brightness of the RPM/shift LEDs.
• Button combinations: Click on the button combination description tab in the upper right corner of the steering wheel page to show a list of button input numbers and programming input combinations.
• RPM light colour: When hovering the mouse over the RPM light, a colour palette will appear for changing the colours. Simply click on a preferred colour to set the indicator light colour. Alternatively, clicking the coloured icons on the palette opens the RGB colour editor for additional colour options.
• Change button colours: When hovering the mouse over the buttons on the steering wheel image, a colour palette will appear for changing the colours. Simply click on a preferred colour to set the button light. Alternatively, clicking the coloured icons on the palette opens the RGB colour editor for additional colour options.

Parameters

✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz