Using The System Setup Program; Overview; Viewing The System Setup Screens - Dell Latitude 100L Owner's Manual

FILE LOCATION: C:\Documents and Settings\patricia_drake\Desktop\New Folder\D5016c90.fm
Environmental
Maximum vibration:
Operating
Storage
Maximum shock (measured with the
hard drive in head-parked position
and 2-ms half-sine pulse):
Operating
Storage
Altitude (maximum):
Operating
Storage

Using the System Setup Program

Overview

NOTE:
Your operating system may automatically configure most of the options available in the system
setup program, thus overriding options that you set through the system setup program. For more
information on configuring features for your operating system, see the Help and Support Center. To
access help, see page 17.
The system setup screens display the current setup information and settings for your computer,
such as:
• System configuration
• Boot order
• Boot (start-up) configuration and docking-device configuration settings
• Basic device configuration settings
• System security and hard-drive password settings
NOTICE:
not change the settings for the system setup program. Certain changes might make your computer work
incorrectly.

Viewing the System Setup Screens

Turn on (or restart) your computer.
1
When the DELL™ logo appears, press <F2> immediately. If you wait too long and the
2
Windows logo appears, continue to wait until you see the Windows desktop. Then shut down
your computer (see page 36) and try again.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 1 8 / 0 4 – F O R P R O O F O N LY
98
Appendix
(continued)
0.6 GRMS
1.3 GRMS
122 G
163 G
–15.2 to 3048 m (–50 to 10,000 ft)
–15.2 to 10,668 m (–50 to 35,000 ft)
Unless you are an expert computer user or are directed to do so by Dell technical support, do